2015 Scion iQ Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2015 Scion iQ, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 54.1 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
2015 iQ — Year-Specific Fitment Context
The 2015 model year is the final year of the Scion iQ's 4x100 bolt pattern run (since 2012). Wheels from any 2012–2015 Scion iQ are cross-compatible with the 2015 model.
Scion iQ Bolt Pattern by Year
The table below shows how the iQ's wheel specifications have changed over the years. The 2015 model year is highlighted.
Fitment Notes
The 2015 Scion iQ has a bolt pattern of 4x100.
This means it is a 4 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Scion iQ appears from 2012 to 2015 (4 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
2015 Scion iQ — Frequently Asked Questions
What is the bolt pattern for a 2015 Scion iQ?
The 2015 Scion iQ uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 54.1mm and the offset is 35-45mmmm.
What other years of Scion iQ have the same bolt pattern as the 2015?
The Scion iQ uses the 4x100 pattern from 2012 through 2015. Wheels from any of these model years are dimensionally compatible with the 2015, provided the offset and center bore also match.
Do 2015 Scion iQs use lug bolts or lug nuts?
The 2015 iQ requires M12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the center bore of a 2015 Scion iQ?
The factory center bore (hub bore) for the 2015 Scion iQ is 54.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2015 Scion iQ?
Refer to your owner's manual for exact specs, but always tighten the M12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2015 Scion?
The 2015 iQ uses a 4x100 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Scion iQ is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2012-2015 (4 model years).
- Observed bolt-pattern variants: 1 (4x100).
- Observed total offset span across years: 80.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2015 Scion iQ, please report it via our About page contact so we can verify and update this record.