2020 Toyota Yaris Hatchback Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Toyota Yaris Hatchback, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 54.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2020 Yaris Hatchback — Year-Specific Fitment Context
The 2020 is the only model year of the Toyota Yaris Hatchback in our database using the 4x100 bolt pattern.
Fitment Notes
The 2020 Toyota Yaris Hatchback has a bolt pattern of 4x100.
This means it is a 4 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Toyota Yaris Hatchback appears from 2020 to 2020 (1 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
2020 Toyota Yaris Hatchback — Frequently Asked Questions
What is the bolt pattern for a 2020 Toyota Yaris Hatchback?
The 2020 Toyota Yaris Hatchback uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 54.1mm and the offset is 40mm.
What is the PCD for a 2020 Toyota Yaris Hatchback?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2020 Yaris Hatchback, the PCD is 4x100.
Do 2020 Toyota Yaris Hatchbacks use lug bolts or lug nuts?
The 2020 Yaris Hatchback requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What does 40mm offset mean for the 2020 Yaris Hatchback?
An offset of 40mm means the wheel's mounting surface is 40mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
How tight should I torque the lug nuts on a 2020 Toyota Yaris Hatchback?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I use spacers on my 2020 Toyota Yaris Hatchback?
Yes, but ensure the wheel spacers match the 4x100 bolt pattern and 54.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Toyota Yaris Hatchback is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2020-2020 (1 model years).
- Observed bolt-pattern variants: 1 (4x100).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2020 Toyota Yaris Hatchback, please report it via our About page contact so we can verify and update this record.