2020 Nissan Versa Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Nissan Versa, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2020 Versa — Year-Specific Fitment Context
The 2020 Nissan Versa is in year 14 of 18 using the 4x100 pattern (2007–2024). Wheels from any 2007–2024 Nissan Versa are cross-compatible with the 2020 model.
Nissan Versa Bolt Pattern by Year
The table below shows how the Versa's wheel specifications have changed over the years. The 2020 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2007 | 4x100 | 60.1 | 40 |
| 2008 | 4x100 | 60.1 | 40 |
| 2009 | 4x100 | 60.1 | 40 |
| 2010 | 4x100 | 60.1 | 40 |
| 2011 | 4x100 | 60.1 | 40 |
| 2012 | 4x100 | 60.1 | 40 |
| 2013 | 4x100 | 60.1 | 40 |
| 2014 | 4x100 | 60.1 | 40 |
| 2015 | 4x100 | 60.1 | 40 |
| 2016 | 4x100 | 60.1 | 40 |
| 2017 | 4x100 | 60.1 | 40 |
| 2018 | 4x100 | 60.1 | 40 |
| 2019 | 4x100 | 60.1 | 40 |
| ▸ 2020 | 4x100 | 60.1 | 40 |
| 2021 | 4x100 | 60.1 | 40 |
| 2022 | 4x100 | 60.1 | 40 |
| 2023 | 4x100 | 60.1 | 40 |
| 2024 | 4x100 | 60.1 | 40 |
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 2020 Nissan Versa
For your 2020 Nissan Versa, the 4x100 bolt pattern and 60.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load transfer. The factory offset is 40mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.25) and seat type (conical 60-degree). Never use ball-seat or shank-style nuts, as they can loosen or damage the wheel. Verify that aftermarket wheels are hub-centric or install rings, and always torque to spec.
Historical Fitment Data Reference
In our dataset, Nissan Versa appears from 2007 to 2024 (18 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for wheel settling.
- ✅ Avoid using universal fitment wheels without hub-centric rings; they can cause vibration and stress on studs.
- ✅ Check brake caliper clearance when using wheels with offset less than 35mm, as the Versa has tight tolerances.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Nissan Versa — Frequently Asked Questions
What is the bolt pattern for a 2020 Nissan Versa?
The 2020 Nissan Versa uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 40mm.
What other years of Nissan Versa have the same bolt pattern as the 2020?
The Nissan Versa uses the 4x100 pattern from 2007 through 2024. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
What is the factory wheel offset for a 2020 Nissan Versa?
The OEM offset for the 2020 Versa is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2020 Nissan Versa?
The factory center bore (hub bore) for the 2020 Nissan Versa is 60.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Why is matching the 60.1mm center bore important for the 2020 Versa?
The 60.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What lug nut size does the 2020 Nissan Versa use?
The 2020 Nissan Versa uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset