2024 Nissan Versa Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Nissan Versa, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2024 Versa — Year-Specific Fitment Context
The 2024 model year is the final year of the Nissan Versa's 4x100 bolt pattern run (since 2007). Wheels from any 2007–2024 Nissan Versa are cross-compatible with the 2024 model.
Nissan Versa Bolt Pattern by Year
The table below shows how the Versa's wheel specifications have changed over the years. The 2024 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2007 | 4x100 | 60.1 | 40 |
| 2008 | 4x100 | 60.1 | 40 |
| 2009 | 4x100 | 60.1 | 40 |
| 2010 | 4x100 | 60.1 | 40 |
| 2011 | 4x100 | 60.1 | 40 |
| 2012 | 4x100 | 60.1 | 40 |
| 2013 | 4x100 | 60.1 | 40 |
| 2014 | 4x100 | 60.1 | 40 |
| 2015 | 4x100 | 60.1 | 40 |
| 2016 | 4x100 | 60.1 | 40 |
| 2017 | 4x100 | 60.1 | 40 |
| 2018 | 4x100 | 60.1 | 40 |
| 2019 | 4x100 | 60.1 | 40 |
| 2020 | 4x100 | 60.1 | 40 |
| 2021 | 4x100 | 60.1 | 40 |
| 2022 | 4x100 | 60.1 | 40 |
| 2023 | 4x100 | 60.1 | 40 |
| ▸ 2024 | 4x100 | 60.1 | 40 |
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 2024 Nissan Versa
For the 2024 Nissan Versa, the final year with a 4x100 bolt pattern, precise fitment is critical. The 60.1mm center bore requires hub-centric rings for aftermarket wheels to prevent vibration and ensure load support. Offset is sensitive: stick to 35-45mm to avoid rubbing or clearance issues. Always use the correct 12x1.25 lug nuts with a 60-degree conical seat; improper seat type can cause wheel loosening. Verify wheel weight rating exceeds the Versa's 1,200 lb per corner. Avoid universal fit wheels without proper centering.
Historical Fitment Data Reference
In our dataset, Nissan Versa appears from 2007 to 2024 (18 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Aftermarket wheels often have a larger center bore; always install hub-centric rings to match 60.1mm.
- ✅ Check inner clearance for offset changes: a 35mm offset may require fender rolling on lowered cars.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Nissan Versa — Frequently Asked Questions
What is the bolt pattern for a 2024 Nissan Versa?
The 2024 Nissan Versa uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 40mm.
What other years of Nissan Versa have the same bolt pattern as the 2024?
The Nissan Versa uses the 4x100 pattern from 2007 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2024 Nissan Versa?
Refer to your owner's manual for exact specs, but always tighten the 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 2024 Nissan Versa use?
The 2024 Nissan Versa uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I put aftermarket wheels on my 2024 Nissan Versa?
Absolutely. Just ensure the aftermarket wheels have a 4x100 bolt pattern, an offset near 40mm, and a center bore of at least 60.1mm (using hub rings if larger).
Do 2024 Nissan Versas use lug bolts or lug nuts?
The 2024 Versa requires 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset