2007 Nissan Versa Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Nissan Versa, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2007 Versa — Year-Specific Fitment Context
The 2007 model year marks the beginning of the Nissan Versa's 4x100 bolt pattern era, which continued through 2024 (18 consecutive years). Wheels from any 2007–2024 Nissan Versa are cross-compatible with the 2007 model.
Nissan Versa Bolt Pattern by Year
The table below shows how the Versa's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2007 | 4x100 | 60.1 | 40 |
| 2008 | 4x100 | 60.1 | 40 |
| 2009 | 4x100 | 60.1 | 40 |
| 2010 | 4x100 | 60.1 | 40 |
| 2011 | 4x100 | 60.1 | 40 |
| 2012 | 4x100 | 60.1 | 40 |
| 2013 | 4x100 | 60.1 | 40 |
| 2014 | 4x100 | 60.1 | 40 |
| 2015 | 4x100 | 60.1 | 40 |
| 2016 | 4x100 | 60.1 | 40 |
| 2017 | 4x100 | 60.1 | 40 |
| 2018 | 4x100 | 60.1 | 40 |
| 2019 | 4x100 | 60.1 | 40 |
| 2020 | 4x100 | 60.1 | 40 |
| 2021 | 4x100 | 60.1 | 40 |
| 2022 | 4x100 | 60.1 | 40 |
| 2023 | 4x100 | 60.1 | 40 |
| 2024 | 4x100 | 60.1 | 40 |
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 2007 Nissan Versa
For your 2007 Nissan Versa, the 4x100 bolt pattern and 60.1mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 40mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct 12x1.25 thread pitch and a conical (60-degree) seat—never ball seat or acorn types. Improper lug nuts can loosen or damage the wheel. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Nissan Versa appears from 2007 to 2024 (18 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ Ensure aftermarket wheels have a hub bore ≥60.1mm; use hub-centric rings if larger.
- ✅ Avoid wheels with offset below 35mm or above 45mm to prevent rubbing on struts or fenders.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Nissan Versa — Frequently Asked Questions
What is the bolt pattern for a 2007 Nissan Versa?
The 2007 Nissan Versa uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 40mm.
What other years of Nissan Versa have the same bolt pattern as the 2007?
The Nissan Versa uses the 4x100 pattern from 2007 through 2024. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
What lug nut size does the 2007 Nissan Versa use?
The 2007 Nissan Versa uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I use spacers on my 2007 Nissan Versa?
Yes, but ensure the wheel spacers match the 4x100 bolt pattern and 60.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
What is the PCD for a 2007 Nissan Versa?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2007 Versa, the PCD is 4x100.
Can I put aftermarket wheels on my 2007 Nissan Versa?
Absolutely. Just ensure the aftermarket wheels have a 4x100 bolt pattern, an offset near 40mm, and a center bore of at least 60.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset