2004 Toyota Tacoma Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2004 Toyota Tacoma Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2004 Tacoma Regular Cab — Year-Specific Fitment Context
The 2004 model year is the final year of the Toyota Tacoma Regular Cab's 5x114.3 bolt pattern run (since 1995). Wheels from any 1995–2004 Toyota Tacoma Regular Cab are cross-compatible with the 2004 model. Important: starting in 2005, Toyota switched to 6x139.7 — those wheels will not fit the 2004 model. Across its full production run (1995–2014), the Tacoma Regular Cab has also used: 6x139.7.
Toyota Tacoma Regular Cab Bolt Pattern by Year
The table below shows how the Tacoma Regular Cab's wheel specifications have changed over the years. The 2004 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1995 | 5x114.3 | 60.1 | 40 |
| 1996 | 5x114.3 | 60.1 | 40 |
| 1997 | 5x114.3 | 60.1 | 40 |
| 1998 | 5x114.3 | 60.1 | 40 |
| 1999 | 5x114.3 | 60.1 | 40 |
| 2000 | 5x114.3 | 60.1 | 40 |
| 2001 | 5x114.3 | 60.1 | 40 |
| 2002 | 5x114.3 | 60.1 | 40 |
| 2003 | 5x114.3 | 60.1 | 40 |
| ▸ 2004 | 5x114.3 | 60.1 | 40 |
| 2005 | 6x139.7 | 106.1 | 25-30 |
| 2006 | 6x139.7 | 106.1 | 25-30 |
| 2007 | 6x139.7 | 106.1 | 25-30 |
| 2008 | 6x139.7 | 106.1 | 25-30 |
| 2009 | 6x139.7 | 106.1 | 25-30 |
| 2010 | 6x139.7 | 106.1 | 25-30 |
| 2011 | 6x139.7 | 106.1 | 25-30 |
| 2012 | 6x139.7 | 106.1 | 25-30 |
| 2013 | 6x139.7 | 106.1 | 25-30 |
| 2014 | 6x139.7 | 106.1 | 25-30 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2004 Toyota Tacoma Regular Cab
For your 2004 Toyota Tacoma Regular Cab, the bolt pattern is 5x114.3 with a center bore of 60.1mm. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), so hub-centric rings are essential to prevent vibrations and ensure proper load distribution. The factory offset is around 40mm; staying within ±5mm is recommended to avoid rubbing or suspension interference. Use only 12x1.5 lug nuts with the correct seat type—factory wheels use conical (60-degree) seats, while aftermarket wheels may require ball or conical seats. Always verify lug nut compatibility to prevent wheel loosening. This model is the last year with 5x114.3; 2005+ Tacomas use 6x139.7, which are not interchangeable.
Historical Fitment Data Reference
In our dataset, Toyota Tacoma Regular Cab appears from 1995 to 2014 (20 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 70.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ If using aftermarket wheels, always install hub-centric rings to match the 60.1mm center bore.
- ✅ Check that aftermarket wheels have sufficient brake caliper clearance; some designs may interfere with the front calipers.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2004 Toyota Tacoma Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2004 Toyota Tacoma Regular Cab?
The 2004 Toyota Tacoma Regular Cab uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 40mm.
What other years of Toyota Tacoma Regular Cab have the same bolt pattern as the 2004?
The Toyota Tacoma Regular Cab uses the 5x114.3 pattern from 1995 through 2004. Wheels from any of these model years are dimensionally compatible with the 2004, provided the offset and center bore also match.
Will 2005 Toyota Tacoma Regular Cab wheels fit a 2004 model?
No. The 2005 Toyota Tacoma Regular Cab switched to a 6x139.7 bolt pattern, which is not compatible with the 2004 model's 5x114.3. Using mismatched patterns is unsafe.
Can I put aftermarket wheels on my 2004 Toyota Tacoma Regular Cab?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40mm, and a center bore of at least 60.1mm (using hub rings if larger).
What is the PCD for a 2004 Toyota Tacoma Regular Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2004 Tacoma Regular Cab, the PCD is 5x114.3.
What is the factory wheel offset for a 2004 Toyota Tacoma Regular Cab?
The OEM offset for the 2004 Tacoma Regular Cab is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset