2001 Toyota Tacoma Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 Toyota Tacoma Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2001 Tacoma Regular Cab — Year-Specific Fitment Context
The 2001 Toyota Tacoma Regular Cab is in year 7 of 10 using the 5x114.3 pattern (1995–2004). Wheels from any 1995–2004 Toyota Tacoma Regular Cab are cross-compatible with the 2001 model. Across its full production run (1995–2014), the Tacoma Regular Cab has also used: 6x139.7.
Toyota Tacoma Regular Cab Bolt Pattern by Year
The table below shows how the Tacoma Regular Cab's wheel specifications have changed over the years. The 2001 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1995 | 5x114.3 | 60.1 | 40 |
| 1996 | 5x114.3 | 60.1 | 40 |
| 1997 | 5x114.3 | 60.1 | 40 |
| 1998 | 5x114.3 | 60.1 | 40 |
| 1999 | 5x114.3 | 60.1 | 40 |
| 2000 | 5x114.3 | 60.1 | 40 |
| ▸ 2001 | 5x114.3 | 60.1 | 40 |
| 2002 | 5x114.3 | 60.1 | 40 |
| 2003 | 5x114.3 | 60.1 | 40 |
| 2004 | 5x114.3 | 60.1 | 40 |
| 2005 | 6x139.7 | 106.1 | 25-30 |
| 2006 | 6x139.7 | 106.1 | 25-30 |
| 2007 | 6x139.7 | 106.1 | 25-30 |
| 2008 | 6x139.7 | 106.1 | 25-30 |
| 2009 | 6x139.7 | 106.1 | 25-30 |
| 2010 | 6x139.7 | 106.1 | 25-30 |
| 2011 | 6x139.7 | 106.1 | 25-30 |
| 2012 | 6x139.7 | 106.1 | 25-30 |
| 2013 | 6x139.7 | 106.1 | 25-30 |
| 2014 | 6x139.7 | 106.1 | 25-30 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2001 Toyota Tacoma Regular Cab
The 2001 Toyota Tacoma Regular Cab uses a 5x114.3 bolt pattern with a 60.1mm center bore. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 40mm; deviations beyond ±10mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (12x1.5) and seat type—factory uses conical (60-degree) seats. Using incorrect lug nuts (e.g., ball seat) can lead to wheel loosening. For lifted or lowered trucks, offset sensitivity increases; test fitment before finalizing.
Historical Fitment Data Reference
In our dataset, Toyota Tacoma Regular Cab appears from 1995 to 2014 (20 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 70.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause steering wheel vibration.
- ✅ Check inner clearance for brake calipers and suspension components, especially with wider wheels or lower offsets.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2001 Toyota Tacoma Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2001 Toyota Tacoma Regular Cab?
The 2001 Toyota Tacoma Regular Cab uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 40mm.
What other years of Toyota Tacoma Regular Cab have the same bolt pattern as the 2001?
The Toyota Tacoma Regular Cab uses the 5x114.3 pattern from 1995 through 2004. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
Will wheels from another Toyota fit my 2001 Tacoma Regular Cab?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 60.1mm.
What is the PCD for a 2001 Toyota Tacoma Regular Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2001 Tacoma Regular Cab, the PCD is 5x114.3.
How do I measure the bolt pattern on my 2001 Toyota?
The 2001 Tacoma Regular Cab uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2001 Toyota Tacoma Regular Cab?
The factory center bore (hub bore) for the 2001 Toyota Tacoma Regular Cab is 60.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset