2004 Toyota Tacoma Xtracab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2004 Toyota Tacoma Xtracab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2004 Tacoma Xtracab — Year-Specific Fitment Context
The 2004 model year is the final year of the Toyota Tacoma Xtracab's 5x114.3 bolt pattern run (since 1995). Wheels from any 1995–2004 Toyota Tacoma Xtracab are cross-compatible with the 2004 model.
Toyota Tacoma Xtracab Bolt Pattern by Year
The table below shows how the Tacoma Xtracab's wheel specifications have changed over the years. The 2004 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2004 Toyota Tacoma Xtracab
For your 2004 Toyota Tacoma Xtracab, the bolt pattern is 5x114.3 with a center bore of 60.1mm. Aftermarket wheels often have a larger bore, so hub-centric rings (60.1mm ID) are essential to prevent vibration and ensure proper load transfer. The factory offset is 40mm; staying within ±5mm is recommended to avoid rubbing or suspension interference. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (cone or ball seat) matching the wheel. Improper lug nuts can cause wheel separation. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Toyota Tacoma Xtracab appears from 1995 to 2004 (10 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 83 ft-lbs after 50-100 miles, then periodically check.
- ✅ Avoid wheels with offset below 35mm or above 45mm to prevent rubbing on control arms or fenders.
- ✅ Verify wheel bore is at least 60.1mm; use hub-centric rings if larger to center the wheel correctly.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2004 Toyota Tacoma Xtracab — Frequently Asked Questions
What is the bolt pattern for a 2004 Toyota Tacoma Xtracab?
The 2004 Toyota Tacoma Xtracab uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 40mm.
What other years of Toyota Tacoma Xtracab have the same bolt pattern as the 2004?
The Toyota Tacoma Xtracab uses the 5x114.3 pattern from 1995 through 2004. Wheels from any of these model years are dimensionally compatible with the 2004, provided the offset and center bore also match.
Will wheels from another Toyota fit my 2004 Tacoma Xtracab?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 60.1mm.
What is the center bore of a 2004 Toyota Tacoma Xtracab?
The factory center bore (hub bore) for the 2004 Toyota Tacoma Xtracab is 60.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Why is matching the 60.1mm center bore important for the 2004 Tacoma Xtracab?
The 60.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 2004 Toyota Tacoma Xtracab?
The OEM offset for the 2004 Tacoma Xtracab is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset