2022 Toyota Avalon Hybrid Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2022 Toyota Avalon Hybrid, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 35-45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2022 Avalon Hybrid — Year-Specific Fitment Context
The 2022 model year is the final year of the Toyota Avalon Hybrid's 5x114.3 bolt pattern run (since 2017). Wheels from any 2017–2022 Toyota Avalon Hybrid are cross-compatible with the 2022 model.
Toyota Avalon Hybrid Bolt Pattern by Year
The table below shows how the Avalon Hybrid's wheel specifications have changed over the years. The 2022 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2022 Toyota Avalon Hybrid
For your 2022 Toyota Avalon Hybrid, the bolt pattern is 5x114.3 with a critical center bore of 60.1mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset must stay within 35-45mm; deviations risk rubbing or poor handling. Always use 12x1.5 lug nuts with the correct seat type—factory wheels use conical (60-degree) seats; aftermarket may require ball or conical seats. Mismatched lug nuts can cause wheel loosening. Verify lug nut engagement (at least 6-8 full turns) and torque to 76 ft-lbs. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Toyota Avalon Hybrid appears from 2017 to 2022 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 76 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, always install hub-centric rings (60.1mm ID) to prevent vibrations.
- ✅ Check that aftermarket wheels have sufficient clearance for the Avalon's large brake calipers; some 18-inch wheels may not fit.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2022 Toyota Avalon Hybrid — Frequently Asked Questions
What is the bolt pattern for a 2022 Toyota Avalon Hybrid?
The 2022 Toyota Avalon Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-45mm.
What other years of Toyota Avalon Hybrid have the same bolt pattern as the 2022?
The Toyota Avalon Hybrid uses the 5x114.3 pattern from 2017 through 2022. Wheels from any of these model years are dimensionally compatible with the 2022, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2022 Toyota Avalon Hybrid?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-45mm, and a center bore of at least 60.1mm (using hub rings if larger).
What is the factory wheel offset for a 2022 Toyota Avalon Hybrid?
The OEM offset for the 2022 Avalon Hybrid is typically around 35-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2022 Toyota Avalon Hybrid?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 60.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
What is the PCD for a 2022 Toyota Avalon Hybrid?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2022 Avalon Hybrid, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset