2017 Toyota Avalon Hybrid Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 Toyota Avalon Hybrid, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 35-45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2017 Avalon Hybrid — Year-Specific Fitment Context
The 2017 model year marks the beginning of the Toyota Avalon Hybrid's 5x114.3 bolt pattern era, which continued through 2022 (6 consecutive years). Wheels from any 2017–2022 Toyota Avalon Hybrid are cross-compatible with the 2017 model.
Toyota Avalon Hybrid Bolt Pattern by Year
The table below shows how the Avalon Hybrid's wheel specifications have changed over the years. The 2017 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2017 Toyota Avalon Hybrid
For the 2017 Toyota Avalon Hybrid, the 5x114.3 bolt pattern and 60.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load transfer. Offset must stay within 35-45mm; deviations risk rubbing or poor handling. Always use lug nuts with the correct 12x1.5 thread pitch and matching seat type (conical or ball seat) to avoid loosening or damage. Verify lug nut seating with the wheel manufacturer. Improper fitment compromises safety.
Historical Fitment Data Reference
In our dataset, Toyota Avalon Hybrid appears from 2017 to 2022 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fitment wheels without hub-centric rings; they can cause steering wheel vibration.
- ✅ Check that aftermarket wheels clear the brake calipers, as the Avalon Hybrid has larger front brakes than non-hybrid models.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2017 Toyota Avalon Hybrid — Frequently Asked Questions
What is the bolt pattern for a 2017 Toyota Avalon Hybrid?
The 2017 Toyota Avalon Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-45mm.
What other years of Toyota Avalon Hybrid have the same bolt pattern as the 2017?
The Toyota Avalon Hybrid uses the 5x114.3 pattern from 2017 through 2022. Wheels from any of these model years are dimensionally compatible with the 2017, provided the offset and center bore also match.
Why is matching the 60.1mm center bore important for the 2017 Avalon Hybrid?
The 60.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How tight should I torque the lug nuts on a 2017 Toyota Avalon Hybrid?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Do 2017 Toyota Avalon Hybrids use lug bolts or lug nuts?
The 2017 Avalon Hybrid requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2017 Toyota Avalon Hybrid?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2017 Avalon Hybrid, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset