2026 Toyota RAV4 Prime (PHEV) Bolt Pattern

Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Toyota RAV4 Prime (PHEV) is 5x114.3 (5x4.5"). It has a center bore of 60.1 mm, an offset range of 35-45, and utilizes 12x1.5 (Flat seat, 21mm hex) fasteners tightened to 76 ft-lbs (103 Nm).

2026 Toyota RAV4 Prime (PHEV) Wheel Fitment Specs

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Center Bore (Hub Bore) 60.1 mm
Offset Range (ET) 35-45
Thread Size (Lug Nut / Bolt) 12x1.5
Fastener Seat Type Flat / Mag Seat (Washer)
Lug Wrench / Socket Hex Size 21mm
Wheel Torque Specs 76 ft-lbs (103 Nm)
💡

Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.

🛠️ Managing a shop, wheel inventory, or app? Stop searching one by one.
Download 12,902 Vehicle Database (CSV) →
🔍 Check fitment for other vehicles using our Ultimate Bolt Pattern Finder tool →

2026 RAV4 Prime (PHEV) — Year-Specific Fitment Context

The 2026 model year is the final year of the Toyota RAV4 Prime (PHEV)'s 5x114.3 bolt pattern run (since 2024). Wheels from any 2024–2026 Toyota RAV4 Prime (PHEV) are cross-compatible with the 2026 model.

Toyota RAV4 Prime (PHEV) Bolt Pattern by Year

Looking for all generations? View the complete Toyota RAV4 Prime (PHEV) (2024–2026) Bolt Pattern & Generation Guide →

The table below shows how the RAV4 Prime (PHEV)'s wheel specifications have changed over the years. The 2026 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2024 5x114.3 60.1 35-45
2025 5x114.3 60.1 35-45
▸ 2026 5x114.3 60.1 35-45

2026 Toyota RAV4 Prime (PHEV) Wheel Interchange & Donor Fitment Guide (5x114.3)

The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Toyota RAV4 Prime (PHEV), donor rims must match the 5x114.3 PCD and have a center bore of at least 60.1 mm:

DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 60.1mm Center Bore (No Hub Rings Needed)

Compatible Donor Vehicle Center Bore OEM Offset (ET) Lug Thread & Seat
2024 Ram 1000 60.1 mm (Exact) 40 12x1.5 (Flat)
2008 Saturn VUE 60.1 mm (Exact) 40 12x1.5 (Cone)
2016 Scion iM 60.1 mm (Exact) 35-45mm M12x1.5 (Cone)
2011 Scion tC 60.1 mm (Exact) 39 12x1.5 (Cone)
2008 Scion xB 60.1 mm (Exact) 45 12x1.5 (Cone)
2025 Subaru Solterra 60.1 mm (Exact) 40 12x1.5 (Flat)

HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)

Donor Vehicle Donor Bore Required Hub Ring (OD → ID) OEM Offset (ET)
2026 Lincoln Aviator 70.5 mm 70.5mm → 60.1mm 37.5
1994 Lincoln Continental 70.3 mm 70.3mm → 60.1mm 40
2016 Lincoln MKS 63.4 mm 63.4mm → 60.1mm 45
2018 Lincoln MKT 63.4 mm 63.4mm → 60.1mm 35-45mm
1993 Lincoln Town Car 70.3 mm 70.3mm → 60.1mm 10
2025 Lotus Eletre 64.1 mm 64.1mm → 60.1mm Not Applicable
Looking for all models? View the complete directory of vehicles with 5x114.3 bolt pattern →

Quick Tips & Safety Warnings

Ready to upgrade or perform maintenance?

🛒 Shop Tools & Accessories on Amazon

As an Amazon Associate, I earn from qualifying purchases.

2026 Toyota RAV4 Prime (PHEV) — Frequently Asked Questions

What is the bolt pattern for a 2026 Toyota RAV4 Prime (PHEV)?

The 2026 Toyota RAV4 Prime (PHEV) uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-45mm.

What other years of Toyota RAV4 Prime (PHEV) have the same bolt pattern as the 2026?

The Toyota RAV4 Prime (PHEV) uses the 5x114.3 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.

How do I measure the bolt pattern on my 2026 Toyota?

The 2026 RAV4 Prime (PHEV) uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.

How tight should I torque the lug nuts on a 2026 Toyota RAV4 Prime (PHEV)?

Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

What is the factory wheel offset for a 2026 Toyota RAV4 Prime (PHEV)?

The OEM offset for the 2026 RAV4 Prime (PHEV) is typically around 35-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

Why is matching the 60.1mm center bore important for the 2026 RAV4 Prime (PHEV)?

The 60.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.

For Tire & Wheel Shops, Shopify Stores & Developers

Running a Tire Shop or Wheel Store?

Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.

Get Master Spreadsheet (CSV) →
Confidence Level
Medium
Verified Source
Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last Updated
2026-11-18

Toyota RAV4 Prime (PHEV) By Year

2024 2025 2026

Other Toyota Models

4Runner Avalon Avalon Hybrid Camry Hybrid Celica Corolla Hybrid Cressida GR Corolla GR Supra GR86 Grand Highlander MR2 Paseo Prius Prius Prime (PHEV) RAV4 RAV4 Prime Sienna T100 Xtracab Tundra Double Cab

Popular Vehicle Fitment

▶ Ford Mustang Specs ▶ Chevy Tahoe Specs ▶ Honda Civic Specs ▶ Ford F-150 Specs ▶ Toyota Camry Specs

Common Bolt Patterns

▶ 5x114.3 (5x4.5") ▶ 6x139.7 (6x5.5") ▶ 5x120 ▶ 5x127 (5x5") ▶ 5x112 (European)