2024 Toyota RAV4 Prime (PHEV) Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Toyota RAV4 Prime (PHEV), along with offset and center bore data.
2024 Toyota RAV4 Prime (PHEV) Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 35-45 |
| Torque Specs | 76 ft-lbs (103 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2024 RAV4 Prime (PHEV) — Year-Specific Fitment Context
The 2024 model year marks the beginning of the Toyota RAV4 Prime (PHEV)'s 5x114.3 bolt pattern era, which continued through 2025 (2 consecutive years). Wheels from any 2024–2025 Toyota RAV4 Prime (PHEV) are cross-compatible with the 2024 model.
Toyota RAV4 Prime (PHEV) Bolt Pattern by Year
The table below shows how the RAV4 Prime (PHEV)'s wheel specifications have changed over the years. The 2024 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2024 | 5x114.3 | 60.1 | 35-45 |
| 2025 | 5x114.3 | 60.1 | 35-45 |
5x114.3 Pattern Context
This bolt pattern appears on 3207 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 76 ft-lbs (103 Nm), then re-check torque after 50-100 km (30-60 miles).
2024 Toyota RAV4 Prime (PHEV) — Frequently Asked Questions
What is the bolt pattern for a 2024 Toyota RAV4 Prime (PHEV)?
The 2024 Toyota RAV4 Prime (PHEV) uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-45mm.
What other years of Toyota RAV4 Prime (PHEV) have the same bolt pattern as the 2024?
The Toyota RAV4 Prime (PHEV) uses the 5x114.3 pattern from 2024 through 2025. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2024 Toyota?
The 2024 RAV4 Prime (PHEV) uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Why is matching the 60.1mm center bore important for the 2024 RAV4 Prime (PHEV)?
The 60.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How tight should I torque the lug nuts on a 2024 Toyota RAV4 Prime (PHEV)?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 2024 Toyota RAV4 Prime (PHEV)?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-45mm, and a center bore of at least 60.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset