2025 Toyota bZ4X Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Toyota bZ4X is 5x114.3 (5x4.5"). It has a center bore of 60.1 mm, an offset range of 40, and utilizes 12x1.5 (Flat seat, 21mm hex) fasteners tightened to 76 ft-lbs (103 Nm).
2025 Toyota bZ4X Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 60.1 mm |
| Offset Range (ET) | 40 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 76 ft-lbs (103 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2025 bZ4X — Year-Specific Fitment Context
The 2025 Toyota bZ4X is in year 3 of 4 using the 5x114.3 pattern (2023–2026). Wheels from any 2023–2026 Toyota bZ4X are cross-compatible with the 2025 model.
Toyota bZ4X Bolt Pattern by Year
Looking for all generations? View the complete Toyota bZ4X (2023–2026) Bolt Pattern & Generation Guide →
The table below shows how the bZ4X's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Toyota bZ4X Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 Toyota bZ4X, donor rims must match the 5x114.3 PCD and have a center bore of at least 60.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 60.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Lexus ES | 60.1 mm (Exact) | 40 | 12x1.5 (Flat) |
| 2020 Lexus GS | 60.1 mm (Exact) | 35-45 | 14x1.5 (Flat/Mag) |
| 2007 Lexus GX | 60.1 mm (Exact) | 25 | N 12x1.50 (Flat/Mag) |
| 2025 Lexus IS | 60.1 mm (Exact) | 35-45 | 12x1.5 (Flat) |
| 2025 Lexus NX | 60.1 mm (Exact) | 35-45 | 14x1.5 (Flat) |
| 2025 Lexus RC | 60.1 mm (Exact) | 35-45 | 12x1.5 (Flat) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2025 Aston Martin DBX | 68.1 mm | 68.1mm → 60.1mm |
35-45mm |
| 2018 Aston Martin Vanquish S | 68.1 mm | 68.1mm → 60.1mm |
35-45mm |
| 2007 Aston Martin Vantage | 66.1 mm | 66.1mm → 60.1mm |
50 |
| 2018 Chevrolet City Express | 66.1 mm | 66.1mm → 60.1mm |
44 |
| 2017 Chevrolet SS | 66.1 mm | 66.1mm → 60.1mm |
44 |
| 1993 Chrysler New Yorker | 71.6 mm | 71.6mm → 60.1mm |
40 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 76 ft-lbs (103 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Toyota bZ4X — Frequently Asked Questions
What is the bolt pattern for a 2025 Toyota bZ4X?
The 2025 Toyota bZ4X uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 40mm.
What other years of Toyota bZ4X have the same bolt pattern as the 2025?
The Toyota bZ4X uses the 5x114.3 pattern from 2023 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
What is the factory wheel offset for a 2025 Toyota bZ4X?
The OEM offset for the 2025 bZ4X is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 2025 Toyota bZ4X?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40mm, and a center bore of at least 60.1mm (using hub rings if larger).
Will wheels from another Toyota fit my 2025 bZ4X?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 60.1mm.
What is the center bore of a 2025 Toyota bZ4X?
The factory center bore (hub bore) for the 2025 Toyota bZ4X is 60.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →