2024 Toyota bZ4X Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2024 Toyota bZ4X is 5x114.3 (5x4.5"). It has a center bore of 60.1 mm, an offset range of 40, and utilizes 12x1.5 (Flat seat, 21mm hex) fasteners tightened to 76 ft-lbs (103 Nm).
2024 Toyota bZ4X Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 60.1 mm |
| Offset Range (ET) | 40 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 76 ft-lbs (103 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2024 bZ4X — Year-Specific Fitment Context
The 2024 Toyota bZ4X is in year 2 of 4 using the 5x114.3 pattern (2023–2026). Wheels from any 2023–2026 Toyota bZ4X are cross-compatible with the 2024 model.
Toyota bZ4X Bolt Pattern by Year
Looking for all generations? View the complete Toyota bZ4X (2023–2026) Bolt Pattern & Generation Guide →
The table below shows how the bZ4X's wheel specifications have changed over the years. The 2024 model year is highlighted.
2024 Toyota bZ4X Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2024 Toyota bZ4X, donor rims must match the 5x114.3 PCD and have a center bore of at least 60.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 60.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Lexus ES | 60.1 mm (Exact) | 40 | 12x1.5 (Flat) |
| 2020 Lexus GS | 60.1 mm (Exact) | 35-45 | 14x1.5 (Flat/Mag) |
| 2007 Lexus GX | 60.1 mm (Exact) | 25 | N 12x1.50 (Flat/Mag) |
| 2025 Lexus IS | 60.1 mm (Exact) | 35-45 | 12x1.5 (Flat) |
| 2025 Lexus NX | 60.1 mm (Exact) | 35-45 | 14x1.5 (Flat) |
| 2025 Lexus RC | 60.1 mm (Exact) | 35-45 | 12x1.5 (Flat) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2000 Dodge Stratus | 67.1 mm | 67.1mm → 60.1mm |
41 |
| 1999 Dodge Viper | 70.5 mm | 70.5mm → 60.1mm |
50 front, 70 rear |
| 2025 Ferrari 12Cilindri | 67.1 mm | 67.1mm → 60.1mm |
Not Applicable |
| 2025 Ferrari 296 | 67.1 mm | 67.1mm → 60.1mm |
Not Applicable |
| 2022 Ferrari 296 GTB | 67.1 mm | 67.1mm → 60.1mm |
45 |
| 2015 Ferrari 458 Italia | 67.1 mm | 67.1mm → 60.1mm |
45 front, 58 rear |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 76 ft-lbs (103 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Toyota bZ4X — Frequently Asked Questions
What is the bolt pattern for a 2024 Toyota bZ4X?
The 2024 Toyota bZ4X uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 40mm.
What other years of Toyota bZ4X have the same bolt pattern as the 2024?
The Toyota bZ4X uses the 5x114.3 pattern from 2023 through 2026. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
What does 40mm offset mean for the 2024 bZ4X?
An offset of 40mm means the wheel's mounting surface is 40mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
Can I put aftermarket wheels on my 2024 Toyota bZ4X?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40mm, and a center bore of at least 60.1mm (using hub rings if larger).
How do I measure the bolt pattern on my 2024 Toyota?
The 2024 bZ4X uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I use spacers on my 2024 Toyota bZ4X?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 60.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →