2023 Toyota C-HR Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2023 Toyota C-HR, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Lug Nut / Bolt Size M12x1.5
Center Bore (CB) 60.1 mm
Offset (ET) 35-50mm
Torque Specs 80 ft-lbs (108 Nm)

2023 C-HR — Year-Specific Fitment Context

The 2023 model year is the final year of the Toyota C-HR's 5x114.3 bolt pattern run (since 2018). Wheels from any 2018–2023 Toyota C-HR are cross-compatible with the 2023 model.

Toyota C-HR Bolt Pattern by Year

The table below shows how the C-HR's wheel specifications have changed over the years. The 2023 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2018 5x114.3 60.1 45
2019 5x114.3 60.1 45
2020 5x114.3 60.1 35-50mm
2021 5x114.3 60.1 35-50mm
2022 5x114.3 60.1 35-50mm
▸ 2023 5x114.3 60.1 35-50mm

Fitment Notes

The 2023 Toyota C-HR has a bolt pattern of 5x114.3.

Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".

This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Toyota C-HR appears from 2018 to 2023 (6 model years).

Across recorded model years, this model generally keeps the same bolt pattern.

5x114.3 Pattern Context

This bolt pattern appears on 2902 vehicles in our current database and is considered very common.

Examples of other vehicles using 5x114.3:

2023 Toyota C-HR — Frequently Asked Questions

What is the bolt pattern for a 2023 Toyota C-HR?

The 2023 Toyota C-HR uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-50mmmm.

What other years of Toyota C-HR have the same bolt pattern as the 2023?

The Toyota C-HR uses the 5x114.3 pattern from 2018 through 2023. Wheels from any of these model years are dimensionally compatible with the 2023, provided the offset and center bore also match.

What lug nut size does the 2023 Toyota C-HR use?

The 2023 Toyota C-HR uses M12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.

Can I put aftermarket wheels on my 2023 Toyota C-HR?

Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-50mmmm, and a center bore of at least 60.1mm (using hub rings if larger).

Do 2023 Toyota C-HRs use lug bolts or lug nuts?

The 2023 C-HR requires M12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.

How tight should I torque the lug nuts on a 2023 Toyota C-HR?

Refer to your owner's manual for exact specs, but always tighten the M12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Toyota C-HR is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2023 Toyota C-HR, please report it via our About page contact so we can verify and update this record.

Toyota C-HR By Year

2018 2019 2020 2021 2022 2023

Other Toyota Models

4Runner C-HR Celica Corolla Cross Matrix Prius Prius Plug-in Hybrid Prius c RAV4 Hybrid Regular Cab Sequoia Solara Tacoma Double Cab Tundra Access Cab Tundra CrewMax Tundra Double Cab Tundra Regular Cab Venza Xtra Cab Yaris