2021 Toyota C-HR Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2021 Toyota C-HR, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 35-50mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2021 C-HR — Year-Specific Fitment Context
The 2021 Toyota C-HR is in year 4 of 6 using the 5x114.3 pattern (2018–2023). Wheels from any 2018–2023 Toyota C-HR are cross-compatible with the 2021 model.
Toyota C-HR Bolt Pattern by Year
The table below shows how the C-HR's wheel specifications have changed over the years. The 2021 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2021 Toyota C-HR
For the 2021 Toyota C-HR, the bolt pattern is 5x114.3 with a critical center bore of 60.1mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The offset range is 35-50mm; staying within this range maintains suspension geometry and avoids rubbing. Always use M12x1.5 lug nuts with the correct seat type (conical or ball seat) matching the wheel. Improper lug nut seating can cause wheel loosening. Verify that aftermarket wheels are load-rated for the C-HR's weight. Safety first: incorrect fitment compromises handling and braking.
Historical Fitment Data Reference
In our dataset, Toyota C-HR appears from 2018 to 2023 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 95.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid spacers unless hub-centric; they can alter offset and stress bearings.
- ✅ Check wheel clearance with the brake caliper and suspension components before final installation.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2021 Toyota C-HR — Frequently Asked Questions
What is the bolt pattern for a 2021 Toyota C-HR?
The 2021 Toyota C-HR uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-50mmmm.
What other years of Toyota C-HR have the same bolt pattern as the 2021?
The Toyota C-HR uses the 5x114.3 pattern from 2018 through 2023. Wheels from any of these model years are dimensionally compatible with the 2021, provided the offset and center bore also match.
What lug nut size does the 2021 Toyota C-HR use?
The 2021 Toyota C-HR uses M12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I use spacers on my 2021 Toyota C-HR?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 60.1mm center bore. Also verify that you have enough thread engagement for your M12x1.5 hardware.
What is the center bore of a 2021 Toyota C-HR?
The factory center bore (hub bore) for the 2021 Toyota C-HR is 60.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2021 Toyota C-HR?
Refer to your owner's manual for exact specs, but always tighten the M12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset