2019 Toyota C-HR Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Toyota C-HR, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2019 C-HR — Year-Specific Fitment Context
The 2019 Toyota C-HR is in year 2 of 6 using the 5x114.3 pattern (2018–2023). Wheels from any 2018–2023 Toyota C-HR are cross-compatible with the 2019 model.
Toyota C-HR Bolt Pattern by Year
The table below shows how the C-HR's wheel specifications have changed over the years. The 2019 model year is highlighted.
Fitment Notes
The 2019 Toyota C-HR has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Toyota C-HR appears from 2018 to 2023 (6 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 95.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
2019 Toyota C-HR — Frequently Asked Questions
What is the bolt pattern for a 2019 Toyota C-HR?
The 2019 Toyota C-HR uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 45mm.
What other years of Toyota C-HR have the same bolt pattern as the 2019?
The Toyota C-HR uses the 5x114.3 pattern from 2018 through 2023. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
Do 2019 Toyota C-HRs use lug bolts or lug nuts?
The 2019 C-HR requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2019 Toyota C-HR?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2019 C-HR, the PCD is 5x114.3.
Why is matching the 60.1mm center bore important for the 2019 C-HR?
The 60.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I put aftermarket wheels on my 2019 Toyota C-HR?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 45mm, and a center bore of at least 60.1mm (using hub rings if larger).
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Toyota C-HR is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2018-2023 (6 model years).
- Observed bolt-pattern variants: 1 (5x114.3).
- Observed total offset span across years: 95.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2019 Toyota C-HR, please report it via our About page contact so we can verify and update this record.