1995 Toyota Tacoma Xtracab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1995 Toyota Tacoma Xtracab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1995 Tacoma Xtracab — Year-Specific Fitment Context
The 1995 model year marks the beginning of the Toyota Tacoma Xtracab's 5x114.3 bolt pattern era, which continued through 2004 (10 consecutive years). Wheels from any 1995–2004 Toyota Tacoma Xtracab are cross-compatible with the 1995 model.
Toyota Tacoma Xtracab Bolt Pattern by Year
The table below shows how the Tacoma Xtracab's wheel specifications have changed over the years. The 1995 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1995 Toyota Tacoma Xtracab
For your 1995 Toyota Tacoma Xtracab, the 5x114.3 bolt pattern is shared with 1995-2004 models. The 60.1mm center bore requires hub-centric rings for aftermarket wheels to avoid vibration. Offset is critical: stock is 40mm; deviations affect scrub radius and clearance. Use only 12x1.5 lug nuts with correct seat (conical 60-degree for most aftermarket wheels; ball seat for OEM). Always verify wheel backspacing and caliper clearance. Improper fitment risks wheel separation.
Historical Fitment Data Reference
In our dataset, Toyota Tacoma Xtracab appears from 1995 to 2004 (10 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid wheels with center bore larger than 60.1mm without hub-centric rings; vibration and lug nut stress may occur.
- ✅ Check for caliper clearance when using wheels with offset below 35mm or above 45mm; spacers may be needed.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1995 Toyota Tacoma Xtracab — Frequently Asked Questions
What is the bolt pattern for a 1995 Toyota Tacoma Xtracab?
The 1995 Toyota Tacoma Xtracab uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 40mm.
What other years of Toyota Tacoma Xtracab have the same bolt pattern as the 1995?
The Toyota Tacoma Xtracab uses the 5x114.3 pattern from 1995 through 2004. Wheels from any of these model years are dimensionally compatible with the 1995, provided the offset and center bore also match.
What is the center bore of a 1995 Toyota Tacoma Xtracab?
The factory center bore (hub bore) for the 1995 Toyota Tacoma Xtracab is 60.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What does 40mm offset mean for the 1995 Tacoma Xtracab?
An offset of 40mm means the wheel's mounting surface is 40mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
Can I use spacers on my 1995 Toyota Tacoma Xtracab?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 60.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
What lug nut size does the 1995 Toyota Tacoma Xtracab use?
The 1995 Toyota Tacoma Xtracab uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset