1998 Toyota Tacoma Xtracab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1998 Toyota Tacoma Xtracab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1998 Tacoma Xtracab — Year-Specific Fitment Context
The 1998 Toyota Tacoma Xtracab is in year 4 of 10 using the 5x114.3 pattern (1995–2004). Wheels from any 1995–2004 Toyota Tacoma Xtracab are cross-compatible with the 1998 model.
Toyota Tacoma Xtracab Bolt Pattern by Year
The table below shows how the Tacoma Xtracab's wheel specifications have changed over the years. The 1998 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1998 Toyota Tacoma Xtracab
For your 1998 Toyota Tacoma Xtracab, the bolt pattern is 5x114.3 with a center bore of 60.1mm. When selecting aftermarket wheels, ensure they have a center bore of at least 60.1mm; if larger, use hub-centric rings to prevent vibration and ensure proper load transfer. The recommended offset is around 40mm; deviations beyond ±10mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—factory wheels use a conical (60-degree) seat. Never mix seat types, as improper engagement can lead to wheel loss. Re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Toyota Tacoma Xtracab appears from 1995 to 2004 (10 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 83 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, verify hub bore and use hub-centric rings if needed.
- ✅ Avoid spacers unless necessary; they increase stress on wheel bearings and may require longer studs.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1998 Toyota Tacoma Xtracab — Frequently Asked Questions
What is the bolt pattern for a 1998 Toyota Tacoma Xtracab?
The 1998 Toyota Tacoma Xtracab uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 40mm.
What other years of Toyota Tacoma Xtracab have the same bolt pattern as the 1998?
The Toyota Tacoma Xtracab uses the 5x114.3 pattern from 1995 through 2004. Wheels from any of these model years are dimensionally compatible with the 1998, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 1998 Toyota Tacoma Xtracab?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 1998 Toyota Tacoma Xtracab?
The factory center bore (hub bore) for the 1998 Toyota Tacoma Xtracab is 60.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I put aftermarket wheels on my 1998 Toyota Tacoma Xtracab?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40mm, and a center bore of at least 60.1mm (using hub rings if larger).
Will wheels from another Toyota fit my 1998 Tacoma Xtracab?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 60.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset