2013 Toyota Land Cruiser Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 Toyota Land Cruiser, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 106.1 mm |
| Offset (ET) | 18 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2013 Land Cruiser — Year-Specific Fitment Context
The 2013 Toyota Land Cruiser is in year 22 of 24 using the 6x139.7 pattern (1992–2015). Wheels from any 1992–2015 Toyota Land Cruiser are cross-compatible with the 2013 model. Across its full production run (1992–2024), the Land Cruiser has also used: 5x150.
Toyota Land Cruiser Bolt Pattern by Year
The table below shows how the Land Cruiser's wheel specifications have changed over the years. The 2013 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 6x139.7 | 106.1 | 0 |
| 1993 | 6x139.7 | 106.1 | 0 |
| 1994 | 6x139.7 | 106.1 | 0 |
| 1995 | 6x139.7 | 106.1 | 0 |
| 1996 | 6x139.7 | 106.1 | 0 |
| 1997 | 6x139.7 | 106.1 | 0 |
| 1998 | 5x150 | 110.1 | 60 |
| 1999 | 5x150 | 110.1 | 60 |
| 2000 | 5x150 | 110.1 | 60 |
| 2001 | 5x150 | 110.1 | 60 |
| 2002 | 5x150 | 110.1 | 60 |
| 2003 | 5x150 | 110.1 | 60 |
| 2004 | 5x150 | 110.1 | 60 |
| 2005 | 6x139.7 | 106.1 | 18 |
| 2006 | 6x139.7 | 106.1 | 18 |
| 2007 | 6x139.7 | 106.1 | 18 |
| 2008 | 6x139.7 | 106.1 | 18 |
| 2009 | 6x139.7 | 106.1 | 18 |
| 2010 | 6x139.7 | 106.1 | 18 |
| 2011 | 6x139.7 | 106.1 | 18 |
| ▸ 2013 | 6x139.7 | 106.1 | 18 |
| 2014 | 6x139.7 | 106.1 | 18 |
| 2015 | 6x139.7 | 106.1 | 18 |
| 2016 | 5x150 | 110.1 | 60 |
| 2017 | 5x150 | 110.1 | 60 |
| 2018 | 5x150 | 110.1 | 60 |
| 2019 | 5x150 | 110.1 | 60 |
| 2020 | 5x150 | 110.1 | 60 |
| 2021 | 5x150 | 110.1 | 60 |
| 2024 | 5x150 | 110.1 | 60 |
Fitment Notes
The 2013 Toyota Land Cruiser has a bolt pattern of 6x139.7.
Imperial Conversion: This bolt pattern is commonly referred to as 6x5.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 6x5.5".
This means it is a 6 lug pattern with a circle diameter of 139.7mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Toyota Land Cruiser appears from 1992 to 2024 (30 model years).
Across model years, this model appears with 2 bolt patterns (5x150, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 60.0 mm
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
2013 Toyota Land Cruiser — Frequently Asked Questions
What is the bolt pattern for a 2013 Toyota Land Cruiser?
The 2013 Toyota Land Cruiser uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 106.1mm and the offset is 18mm.
What other years of Toyota Land Cruiser have the same bolt pattern as the 2013?
The Toyota Land Cruiser uses the 6x139.7 pattern from 1992 through 2015. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
Will wheels from another Toyota fit my 2013 Land Cruiser?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 106.1mm.
Do 2013 Toyota Land Cruisers use lug bolts or lug nuts?
The 2013 Land Cruiser requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What lug nut size does the 2013 Toyota Land Cruiser use?
The 2013 Toyota Land Cruiser uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the PCD for a 2013 Toyota Land Cruiser?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2013 Land Cruiser, the PCD is 6x139.7.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Editorial Fitment Notes
Toyota Land Cruiser has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 1992-2024 (30 model years).
- Observed bolt-pattern variants: 2 (5x150, 6x139.7).
- Observed total offset span across years: 60.0 mm.
- Observed center-bore variants: 2 | lug-size variants: 3.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2013 Toyota Land Cruiser, please report it via our About page contact so we can verify and update this record.