1995 Toyota Land Cruiser Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1995 Toyota Land Cruiser, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 106.1 mm |
| Offset (ET) | 0 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1995 Land Cruiser — Year-Specific Fitment Context
The 1995 Toyota Land Cruiser is in year 4 of 24 using the 6x139.7 pattern (1992–2015). Wheels from any 1992–2015 Toyota Land Cruiser are cross-compatible with the 1995 model. Across its full production run (1992–2024), the Land Cruiser has also used: 5x150.
Toyota Land Cruiser Bolt Pattern by Year
The table below shows how the Land Cruiser's wheel specifications have changed over the years. The 1995 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 6x139.7 | 106.1 | 0 |
| 1993 | 6x139.7 | 106.1 | 0 |
| 1994 | 6x139.7 | 106.1 | 0 |
| ▸ 1995 | 6x139.7 | 106.1 | 0 |
| 1996 | 6x139.7 | 106.1 | 0 |
| 1997 | 6x139.7 | 106.1 | 0 |
| 1998 | 5x150 | 110.1 | 60 |
| 1999 | 5x150 | 110.1 | 60 |
| 2000 | 5x150 | 110.1 | 60 |
| 2001 | 5x150 | 110.1 | 60 |
| 2002 | 5x150 | 110.1 | 60 |
| 2003 | 5x150 | 110.1 | 60 |
| 2004 | 5x150 | 110.1 | 60 |
| 2005 | 6x139.7 | 106.1 | 18 |
| 2006 | 6x139.7 | 106.1 | 18 |
| 2007 | 6x139.7 | 106.1 | 18 |
| 2008 | 6x139.7 | 106.1 | 18 |
| 2009 | 6x139.7 | 106.1 | 18 |
| 2010 | 6x139.7 | 106.1 | 18 |
| 2011 | 6x139.7 | 106.1 | 18 |
| 2013 | 6x139.7 | 106.1 | 18 |
| 2014 | 6x139.7 | 106.1 | 18 |
| 2015 | 6x139.7 | 106.1 | 18 |
| 2016 | 5x150 | 110.1 | 60 |
| 2017 | 5x150 | 110.1 | 60 |
| 2018 | 5x150 | 110.1 | 60 |
| 2019 | 5x150 | 110.1 | 60 |
| 2020 | 5x150 | 110.1 | 60 |
| 2021 | 5x150 | 110.1 | 60 |
| 2024 | 5x150 | 110.1 | 60 |
Fitment Notes
The 1995 Toyota Land Cruiser has a bolt pattern of 6x139.7.
Imperial Conversion: This bolt pattern is commonly referred to as 6x5.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 6x5.5".
This means it is a 6 lug pattern with a circle diameter of 139.7mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Toyota Land Cruiser appears from 1992 to 2024 (30 model years).
Across model years, this model appears with 2 bolt patterns (5x150, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 60.0 mm
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
1995 Toyota Land Cruiser — Frequently Asked Questions
What is the bolt pattern for a 1995 Toyota Land Cruiser?
The 1995 Toyota Land Cruiser uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 106.1mm and the offset is 0mm.
What other years of Toyota Land Cruiser have the same bolt pattern as the 1995?
The Toyota Land Cruiser uses the 6x139.7 pattern from 1992 through 2015. Wheels from any of these model years are dimensionally compatible with the 1995, provided the offset and center bore also match.
What does 0mm offset mean for the 1995 Land Cruiser?
An offset of 0mm means the wheel's mounting surface is 0mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
What is the factory wheel offset for a 1995 Toyota Land Cruiser?
The OEM offset for the 1995 Land Cruiser is typically around 0mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 1995 Toyota Land Cruiser?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Do 1995 Toyota Land Cruisers use lug bolts or lug nuts?
The 1995 Land Cruiser requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Editorial Fitment Notes
Toyota Land Cruiser has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 1992-2024 (30 model years).
- Observed bolt-pattern variants: 2 (5x150, 6x139.7).
- Observed total offset span across years: 60.0 mm.
- Observed center-bore variants: 2 | lug-size variants: 3.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1995 Toyota Land Cruiser, please report it via our About page contact so we can verify and update this record.