2024 Toyota Tundra Hybrid CrewMax Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Toyota Tundra Hybrid CrewMax, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 95.1 mm |
| Offset (ET) | 60 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2024 Tundra Hybrid CrewMax — Year-Specific Fitment Context
The 2024 model year is the final year of the Toyota Tundra Hybrid CrewMax's 6x139.7 bolt pattern run (since 2022). Wheels from any 2022–2024 Toyota Tundra Hybrid CrewMax are cross-compatible with the 2024 model.
Toyota Tundra Hybrid CrewMax Bolt Pattern by Year
The table below shows how the Tundra Hybrid CrewMax's wheel specifications have changed over the years. The 2024 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2022 | 6x139.7 | 95.1 | 60 |
| ▸ 2024 | 6x139.7 | 95.1 | 60 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2024 Toyota Tundra Hybrid CrewMax
For the 2024 Toyota Tundra Hybrid CrewMax, the 6x139.7 bolt pattern and 95.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 106.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 60mm; deviations beyond ±10mm may cause rubbing or suspension interference. Always use lug nuts with the correct 14x1.5 thread pitch and a 60-degree conical seat—ball-seat or shank-style nuts are unsafe. Verify wheel load rating exceeds the vehicle's GVWR. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Toyota Tundra Hybrid CrewMax appears from 2022 to 2024 (2 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 154 ft-lb after 50-100 miles of driving.
- ✅ Avoid wheels with offset below 50mm or above 70mm to prevent rubbing on the fender or suspension.
- ✅ If using aftermarket wheels, always install hub-centric rings (95.1mm ID to wheel's bore) to eliminate vibrations.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Toyota Tundra Hybrid CrewMax — Frequently Asked Questions
What is the bolt pattern for a 2024 Toyota Tundra Hybrid CrewMax?
The 2024 Toyota Tundra Hybrid CrewMax uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 95.1mm and the offset is 60mm.
What other years of Toyota Tundra Hybrid CrewMax have the same bolt pattern as the 2024?
The Toyota Tundra Hybrid CrewMax uses the 6x139.7 pattern from 2022 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
What is the factory wheel offset for a 2024 Toyota Tundra Hybrid CrewMax?
The OEM offset for the 2024 Tundra Hybrid CrewMax is typically around 60mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 2024 Toyota Tundra Hybrid CrewMax?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 60mm, and a center bore of at least 95.1mm (using hub rings if larger).
What is the center bore of a 2024 Toyota Tundra Hybrid CrewMax?
The factory center bore (hub bore) for the 2024 Toyota Tundra Hybrid CrewMax is 95.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How do I measure the bolt pattern on my 2024 Toyota?
The 2024 Tundra Hybrid CrewMax uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset