2022 Toyota Tundra Hybrid CrewMax Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2022 Toyota Tundra Hybrid CrewMax, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 95.1 mm |
| Offset (ET) | 60 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2022 Tundra Hybrid CrewMax — Year-Specific Fitment Context
The 2022 model year marks the beginning of the Toyota Tundra Hybrid CrewMax's 6x139.7 bolt pattern era, which continued through 2024 (3 consecutive years). Wheels from any 2022–2024 Toyota Tundra Hybrid CrewMax are cross-compatible with the 2022 model.
Toyota Tundra Hybrid CrewMax Bolt Pattern by Year
The table below shows how the Tundra Hybrid CrewMax's wheel specifications have changed over the years. The 2022 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2022 | 6x139.7 | 95.1 | 60 |
| 2024 | 6x139.7 | 95.1 | 60 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2022 Toyota Tundra Hybrid CrewMax
For the 2022 Toyota Tundra Hybrid CrewMax, the 6x139.7 bolt pattern and 95.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 108mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 60mm; deviations beyond ±10mm may cause rubbing or clearance issues. Always verify lug nut compatibility: use 14x1.5 thread pitch with conical (60-degree) or ball seat, as incorrect seating can lead to wheel loosening. Re-torque after 50-100 miles. Avoid wheels with offset below 50mm or above 70mm without test fitting.
Historical Fitment Data Reference
In our dataset, Toyota Tundra Hybrid CrewMax appears from 2022 to 2024 (2 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings (95.1mm ID to aftermarket bore) to eliminate vibrations and center the wheel properly.
- ✅ Re-torque lug nuts to 154 ft-lb after 50-100 miles; check for proper conical/ball seat engagement.
- ✅ Aftermarket wheels with offset below 50mm may contact brake calipers or fenders; test fit before purchase.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2022 Toyota Tundra Hybrid CrewMax — Frequently Asked Questions
What is the bolt pattern for a 2022 Toyota Tundra Hybrid CrewMax?
The 2022 Toyota Tundra Hybrid CrewMax uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 95.1mm and the offset is 60mm.
What other years of Toyota Tundra Hybrid CrewMax have the same bolt pattern as the 2022?
The Toyota Tundra Hybrid CrewMax uses the 6x139.7 pattern from 2022 through 2024. Wheels from any of these model years are dimensionally compatible with the 2022, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2022 Toyota Tundra Hybrid CrewMax?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What does 60mm offset mean for the 2022 Tundra Hybrid CrewMax?
An offset of 60mm means the wheel's mounting surface is 60mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
Will wheels from another Toyota fit my 2022 Tundra Hybrid CrewMax?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 95.1mm.
What is the factory wheel offset for a 2022 Toyota Tundra Hybrid CrewMax?
The OEM offset for the 2022 Tundra Hybrid CrewMax is typically around 60mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset