2026 Toyota Sequoia Bolt Pattern

Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Toyota Sequoia is 6x139.7 (6x5.5"). It has a center bore of 95.1 mm, an offset range of 60, and utilizes 14x1.5 (Flat seat, 21mm hex) fasteners tightened to 97 ft-lbs (131 Nm).

2026 Toyota Sequoia Wheel Fitment Specs

Bolt Pattern (Lug Pattern) 6x139.7 (6x5.5")
Center Bore (Hub Bore) 95.1 mm
Offset Range (ET) 60
Thread Size (Lug Nut / Bolt) 14x1.5
Fastener Seat Type Flat / Mag Seat (Washer)
Lug Wrench / Socket Hex Size 21mm
Wheel Torque Specs 97 ft-lbs (131 Nm)
💡

Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.

🛠️ Managing a shop, wheel inventory, or app? Stop searching one by one.
Download 12,902 Vehicle Database (CSV) →
🔍 Check fitment for other vehicles using our Ultimate Bolt Pattern Finder tool →

2026 Sequoia — Year-Specific Fitment Context

The 2026 model year is the final year of the Toyota Sequoia's 6x139.7 bolt pattern run (since 2001). Wheels from any 2001–2026 Toyota Sequoia are cross-compatible with the 2026 model. Across its full production run (2001–2026), the Sequoia has also used: 5x150.

Toyota Sequoia Bolt Pattern by Year

Looking for all generations? View the complete Toyota Sequoia (2001–2026) Bolt Pattern & Generation Guide →

The table below shows how the Sequoia's wheel specifications have changed over the years. The 2026 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2001 6x139.7 106.1 12
2002 6x139.7 106.1 12
2003 6x139.7 106.1 12
2004 6x139.7 106.1 12
2005 6x139.7 106.1 12
2006 6x139.7 106.1 12
2007 6x139.7 106.1 12
2008 6x139.7 106.1 12
2009 5x150 110.0 60
2010 5x150 110.0 60
2011 5x150 110.0 60
2012 5x150 110.0 60
2013 5x150 110.0 60
2014 5x150 110.0 60
2015 5x150 110.0 60
2016 5x150 110.0 60
2017 5x150 110.0 60
2018 5x150 110.1 60
2019 5x150 110.1 60
2020 5x150 110.1 60
2021 5x150 110.1 60
2022 5x150 110.1 60
2023 6x139.7 95.1 25
2024 6x139.7 95.1 25
2025 6x139.7 95.1 60
▸ 2026 6x139.7 95.1 60

2026 Toyota Sequoia Wheel Interchange & Donor Fitment Guide (6x139.7)

The 6x139.7 bolt pattern is shared by 1102 vehicles in our database (common). For safe wheel swaps on the 2026 Toyota Sequoia, donor rims must match the 6x139.7 PCD and have a center bore of at least 95.1 mm:

DIRECT HUB MATCH Same 6x139.7 Pattern & Exact 95.1mm Center Bore (No Hub Rings Needed)

Compatible Donor Vehicle Center Bore OEM Offset (ET) Lug Thread & Seat
2022 Lexus LX 95.1 mm (Exact) 60 14x1.5 (Flat/Mag)
2025 Toyota 4Runner 95.1 mm (Exact) 15-25 14x1.5 (Flat)
2024 Toyota Land Cruiser 95.1 mm (Exact) 60 14x1.5 (Flat/Mag)
2025 Toyota Tacoma 95.1 mm (Exact) 25-35 14x1.5 (Flat)
2025 Toyota Tundra 95.1 mm (Exact) 60 14x1.5 (Flat)
2022 Toyota Tundra CrewMax 95.1 mm (Exact) 60 14x1.5 (Flat/Mag)

HUB RING FITMENT Same 6x139.7 Pattern with Larger Center Bore (Hub-Centric Ring Required)

Donor Vehicle Donor Bore Required Hub Ring (OD → ID) OEM Offset (ET)
2025 Isuzu NPR 110 mm 110mm → 95.1mm Not Applicable
2025 Isuzu NPR-HD 110 mm 110mm → 95.1mm Not Applicable
2008 Lexus GX 106.1 mm 106.1mm → 95.1mm 25
2006 Nissan Armada 110.1 mm 110.1mm → 95.1mm 24
1994 Nissan Pathfinder 110.0 mm 110.0mm → 95.1mm 40
2007 Nissan Titan Crew Cab 110.1 mm 110.1mm → 95.1mm 25
Looking for all models? View the complete directory of vehicles with 6x139.7 bolt pattern →

Quick Tips & Safety Warnings

Ready to upgrade or perform maintenance?

🛒 Shop Tools & Accessories on Amazon

As an Amazon Associate, I earn from qualifying purchases.

2026 Toyota Sequoia — Frequently Asked Questions

What is the bolt pattern for a 2026 Toyota Sequoia?

The 2026 Toyota Sequoia uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 95.1mm and the offset is 60mm.

What other years of Toyota Sequoia have the same bolt pattern as the 2026?

The Toyota Sequoia uses the 6x139.7 pattern from 2001 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.

Will wheels from another Toyota fit my 2026 Sequoia?

Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 95.1mm.

What is the factory wheel offset for a 2026 Toyota Sequoia?

The OEM offset for the 2026 Sequoia is typically around 60mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

Can I put aftermarket wheels on my 2026 Toyota Sequoia?

Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 60mm, and a center bore of at least 95.1mm (using hub rings if larger).

Why is matching the 95.1mm center bore important for the 2026 Sequoia?

The 95.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.

For Tire & Wheel Shops, Shopify Stores & Developers

Running a Tire Shop or Wheel Store?

Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.

Get Master Spreadsheet (CSV) →
Confidence Level
Medium
Verified Source
Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last Updated
2026-11-18

Toyota Sequoia By Year

2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026

Other Toyota Models

C-HR Camry Hybrid Corolla Corolla iM Crown Grand Highlander Grand Highlander Hybrid Highlander Land Cruiser MR2 Previa Prius Plug-in Hybrid Prius Prime (PHEV) Prius v RAV4 Prime Sequoia Tacoma Access Cab Tundra Venza Xtra Cab

Popular Vehicle Fitment

▶ Ford Mustang Specs ▶ Chevy Tahoe Specs ▶ Honda Civic Specs ▶ Ford F-150 Specs ▶ Toyota Camry Specs

Common Bolt Patterns

▶ 5x114.3 (5x4.5") ▶ 6x139.7 (6x5.5") ▶ 5x120 ▶ 5x127 (5x5") ▶ 5x112 (European)