2007 Toyota Sequoia Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Toyota Sequoia, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 106.1 mm |
| Offset (ET) | 12 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2007 Sequoia — Year-Specific Fitment Context
The 2007 Toyota Sequoia is in year 7 of 24 using the 6x139.7 pattern (2001–2024). Wheels from any 2001–2024 Toyota Sequoia are cross-compatible with the 2007 model. Across its full production run (2001–2024), the Sequoia has also used: 5x150.
Toyota Sequoia Bolt Pattern by Year
The table below shows how the Sequoia's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 6x139.7 | 106.1 | 12 |
| 2002 | 6x139.7 | 106.1 | 12 |
| 2003 | 6x139.7 | 106.1 | 12 |
| 2004 | 6x139.7 | 106.1 | 12 |
| 2005 | 6x139.7 | 106.1 | 12 |
| 2006 | 6x139.7 | 106.1 | 12 |
| ▸ 2007 | 6x139.7 | 106.1 | 12 |
| 2008 | 6x139.7 | 106.1 | 12 |
| 2009 | 5x150 | 110.0 | 60 |
| 2010 | 5x150 | 110.0 | 60 |
| 2011 | 5x150 | 110.0 | 60 |
| 2012 | 5x150 | 110.0 | 60 |
| 2013 | 5x150 | 110.0 | 60 |
| 2014 | 5x150 | 110.0 | 60 |
| 2015 | 5x150 | 110.0 | 60 |
| 2016 | 5x150 | 110.0 | 60 |
| 2017 | 5x150 | 110.0 | 60 |
| 2018 | 5x150 | 110.1 | 60 |
| 2019 | 5x150 | 110.1 | 60 |
| 2020 | 5x150 | 110.1 | 60 |
| 2021 | 5x150 | 110.1 | 60 |
| 2022 | 5x150 | 110.1 | 60 |
| 2023 | 6x139.7 | 95.1 | 25 |
| 2024 | 6x139.7 | 95.1 | 25 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2007 Toyota Sequoia
For the 2007 Toyota Sequoia, the 6x139.7 bolt pattern and 106.1mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The offset should stay within 12mm of stock; deviations affect handling and bearing life. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (cone or ball seat) to avoid wheel loosening. Mismatched seats can cause failure. Verify wheel load rating exceeds vehicle weight. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Toyota Sequoia appears from 2001 to 2024 (24 model years). Across model years, this model appears with 2 bolt patterns (5x150, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 4
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 48.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 83 ft-lbs after 50-100 miles of driving.
- ✅ Avoid using wheels with a center bore larger than 106.1mm without hub-centric rings.
- ✅ Check for caliper clearance when using wheels with offset less than 0mm or greater than 25mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Toyota Sequoia — Frequently Asked Questions
What is the bolt pattern for a 2007 Toyota Sequoia?
The 2007 Toyota Sequoia uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 106.1mm and the offset is 12mm.
What other years of Toyota Sequoia have the same bolt pattern as the 2007?
The Toyota Sequoia uses the 6x139.7 pattern from 2001 through 2024. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
Do 2007 Toyota Sequoias use lug bolts or lug nuts?
The 2007 Sequoia requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What lug nut size does the 2007 Toyota Sequoia use?
The 2007 Toyota Sequoia uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Will wheels from another Toyota fit my 2007 Sequoia?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 106.1mm.
What does 12mm offset mean for the 2007 Sequoia?
An offset of 12mm means the wheel's mounting surface is 12mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset