2021 Toyota Sequoia Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2021 Toyota Sequoia, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x150 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 110.1 mm |
| Offset (ET) | 60 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2021 Sequoia — Year-Specific Fitment Context
The 2021 Toyota Sequoia is in year 13 of 14 using the 5x150 pattern (2009–2022). Wheels from any 2009–2022 Toyota Sequoia are cross-compatible with the 2021 model. Across its full production run (2001–2024), the Sequoia has also used: 6x139.7.
Toyota Sequoia Bolt Pattern by Year
The table below shows how the Sequoia's wheel specifications have changed over the years. The 2021 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 6x139.7 | 106.1 | 12 |
| 2002 | 6x139.7 | 106.1 | 12 |
| 2003 | 6x139.7 | 106.1 | 12 |
| 2004 | 6x139.7 | 106.1 | 12 |
| 2005 | 6x139.7 | 106.1 | 12 |
| 2006 | 6x139.7 | 106.1 | 12 |
| 2007 | 6x139.7 | 106.1 | 12 |
| 2008 | 6x139.7 | 106.1 | 12 |
| 2009 | 5x150 | 110.0 | 60 |
| 2010 | 5x150 | 110.0 | 60 |
| 2011 | 5x150 | 110.0 | 60 |
| 2012 | 5x150 | 110.0 | 60 |
| 2013 | 5x150 | 110.0 | 60 |
| 2014 | 5x150 | 110.0 | 60 |
| 2015 | 5x150 | 110.0 | 60 |
| 2016 | 5x150 | 110.0 | 60 |
| 2017 | 5x150 | 110.0 | 60 |
| 2018 | 5x150 | 110.1 | 60 |
| 2019 | 5x150 | 110.1 | 60 |
| 2020 | 5x150 | 110.1 | 60 |
| ▸ 2021 | 5x150 | 110.1 | 60 |
| 2022 | 5x150 | 110.1 | 60 |
| 2023 | 6x139.7 | 95.1 | 25 |
| 2024 | 6x139.7 | 95.1 | 25 |
5x150 Pattern Context
This bolt pattern appears on 93 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x150:
Expert Buying Guide for 2021 Toyota Sequoia
The 2021 Toyota Sequoia uses a 5x150 bolt pattern with a 110.1mm center bore. When selecting aftermarket wheels, hub-centric rings are essential to ensure proper load distribution and prevent vibrations, as the bore must match the hub exactly. The factory offset is 60mm; deviations beyond ±10mm may cause rubbing or clearance issues with suspension and brake components. Always use lug nuts with the correct thread pitch (14x1.5) and seat type (conical/60-degree taper) to avoid wheel loosening. Verify that aftermarket wheels are load-rated for the Sequoia's weight. Cross-compatible wheels from 2009–2022 Sequoia models fit directly.
Historical Fitment Data Reference
In our dataset, Toyota Sequoia appears from 2001 to 2024 (24 model years). Across model years, this model appears with 2 bolt patterns (5x150, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 4
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 48.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a smaller center bore than 110.1mm; they will not fit over the hub.
- ✅ Check for brake caliper clearance when using wheels with offset less than 50mm or greater than 70mm.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2021 Toyota Sequoia — Frequently Asked Questions
What is the bolt pattern for a 2021 Toyota Sequoia?
The 2021 Toyota Sequoia uses a 5x150 bolt pattern (also called lug pattern or PCD). The center bore is 110.1mm and the offset is 60mm.
What other years of Toyota Sequoia have the same bolt pattern as the 2021?
The Toyota Sequoia uses the 5x150 pattern from 2009 through 2022. Wheels from any of these model years are dimensionally compatible with the 2021, provided the offset and center bore also match.
What is the PCD for a 2021 Toyota Sequoia?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2021 Sequoia, the PCD is 5x150.
What lug nut size does the 2021 Toyota Sequoia use?
The 2021 Toyota Sequoia uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Will wheels from another Toyota fit my 2021 Sequoia?
Only if they share the exact same 5x150 bolt pattern, a compatible offset, and a center bore equal to or larger than 110.1mm.
Why is matching the 110.1mm center bore important for the 2021 Sequoia?
The 110.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset