2015 Toyota Sequoia Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2015 Toyota Sequoia, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x150 |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 110.0 mm |
| Offset (ET) | 60 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2015 Sequoia — Year-Specific Fitment Context
The 2015 Toyota Sequoia is in year 7 of 14 using the 5x150 pattern (2009–2022). Wheels from any 2009–2022 Toyota Sequoia are cross-compatible with the 2015 model. Across its full production run (2001–2024), the Sequoia has also used: 6x139.7.
Toyota Sequoia Bolt Pattern by Year
The table below shows how the Sequoia's wheel specifications have changed over the years. The 2015 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 6x139.7 | 106.1 | 12 |
| 2002 | 6x139.7 | 106.1 | 12 |
| 2003 | 6x139.7 | 106.1 | 12 |
| 2004 | 6x139.7 | 106.1 | 12 |
| 2005 | 6x139.7 | 106.1 | 12 |
| 2006 | 6x139.7 | 106.1 | 12 |
| 2007 | 6x139.7 | 106.1 | 12 |
| 2008 | 6x139.7 | 106.1 | 12 |
| 2009 | 5x150 | 110.0 | 60 |
| 2010 | 5x150 | 110.0 | 60 |
| 2011 | 5x150 | 110.0 | 60 |
| 2012 | 5x150 | 110.0 | 60 |
| 2013 | 5x150 | 110.0 | 60 |
| 2014 | 5x150 | 110.0 | 60 |
| ▸ 2015 | 5x150 | 110.0 | 60 |
| 2016 | 5x150 | 110.0 | 60 |
| 2017 | 5x150 | 110.0 | 60 |
| 2018 | 5x150 | 110.1 | 60 |
| 2019 | 5x150 | 110.1 | 60 |
| 2020 | 5x150 | 110.1 | 60 |
| 2021 | 5x150 | 110.1 | 60 |
| 2022 | 5x150 | 110.1 | 60 |
| 2023 | 6x139.7 | 95.1 | 25 |
| 2024 | 6x139.7 | 95.1 | 25 |
5x150 Pattern Context
This bolt pattern appears on 93 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x150:
Expert Buying Guide for 2015 Toyota Sequoia
For the 2015 Toyota Sequoia, the 5x150 bolt pattern and 110.0mm center bore are critical. Aftermarket wheels often have a larger center bore; use hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. The factory offset is 60mm; deviations affect scrub radius and clearance. Stick within ±5mm to avoid rubbing or suspension interference. Always use the correct lug nuts: M14x1.50 thread pitch with a conical (60-degree) seat. Never use ball-seat lug nuts, as they can loosen. Re-torque after 50-100 miles to maintain clamping force.
Historical Fitment Data Reference
In our dataset, Toyota Sequoia appears from 2001 to 2024 (24 model years). Across model years, this model appears with 2 bolt patterns (5x150, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 4
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 48.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 97 ft-lb after 50-100 miles of driving.
- ✅ Ensure aftermarket wheels have a minimum load rating of 2,500 lbs per wheel.
- ✅ Check inner clearance for brake calipers; some 18-inch wheels may not clear the Sequoia's large brakes.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2015 Toyota Sequoia — Frequently Asked Questions
What is the bolt pattern for a 2015 Toyota Sequoia?
The 2015 Toyota Sequoia uses a 5x150 bolt pattern (also called lug pattern or PCD). The center bore is 110.0mm and the offset is 60mm.
What other years of Toyota Sequoia have the same bolt pattern as the 2015?
The Toyota Sequoia uses the 5x150 pattern from 2009 through 2022. Wheels from any of these model years are dimensionally compatible with the 2015, provided the offset and center bore also match.
Do 2015 Toyota Sequoias use lug bolts or lug nuts?
The 2015 Sequoia requires N 14x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the factory wheel offset for a 2015 Toyota Sequoia?
The OEM offset for the 2015 Sequoia is typically around 60mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Will wheels from another Toyota fit my 2015 Sequoia?
Only if they share the exact same 5x150 bolt pattern, a compatible offset, and a center bore equal to or larger than 110.0mm.
How do I measure the bolt pattern on my 2015 Toyota?
The 2015 Sequoia uses a 5x150 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset