2010 Toyota Sequoia Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2010 Toyota Sequoia is 5x150. It has a center bore of 110.0 mm, an offset range of 60, and utilizes N 14x1.50 (Flat/Mag seat, 21mm hex) fasteners tightened to 100 ft-lbs (135 Nm).
2010 Toyota Sequoia Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x150 |
|---|---|
| Center Bore (Hub Bore) | 110.0 mm |
| Offset Range (ET) | 60 |
| Thread Size (Lug Nut / Bolt) | N 14x1.50 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 100 ft-lbs (135 Nm) |
2010 Sequoia — Year-Specific Fitment Context
The 2010 Toyota Sequoia is in year 2 of 14 using the 5x150 pattern (2009–2022). Wheels from any 2009–2022 Toyota Sequoia are cross-compatible with the 2010 model. Across its full production run (2001–2025), the Sequoia has also used: 6x139.7.
Toyota Sequoia Bolt Pattern by Year
The table below shows how the Sequoia's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 6x139.7 | 106.1 | 12 |
| 2002 | 6x139.7 | 106.1 | 12 |
| 2003 | 6x139.7 | 106.1 | 12 |
| 2004 | 6x139.7 | 106.1 | 12 |
| 2005 | 6x139.7 | 106.1 | 12 |
| 2006 | 6x139.7 | 106.1 | 12 |
| 2007 | 6x139.7 | 106.1 | 12 |
| 2008 | 6x139.7 | 106.1 | 12 |
| 2009 | 5x150 | 110.0 | 60 |
| ▸ 2010 | 5x150 | 110.0 | 60 |
| 2011 | 5x150 | 110.0 | 60 |
| 2012 | 5x150 | 110.0 | 60 |
| 2013 | 5x150 | 110.0 | 60 |
| 2014 | 5x150 | 110.0 | 60 |
| 2015 | 5x150 | 110.0 | 60 |
| 2016 | 5x150 | 110.0 | 60 |
| 2017 | 5x150 | 110.0 | 60 |
| 2018 | 5x150 | 110.1 | 60 |
| 2019 | 5x150 | 110.1 | 60 |
| 2020 | 5x150 | 110.1 | 60 |
| 2021 | 5x150 | 110.1 | 60 |
| 2022 | 5x150 | 110.1 | 60 |
| 2023 | 6x139.7 | 95.1 | 25 |
| 2024 | 6x139.7 | 95.1 | 25 |
| 2025 | 6x139.7 | 95.1 | 60 |
2010 Toyota Sequoia Wheel Interchange & Donor Fitment Guide (5x150)
The 5x150 bolt pattern is shared by 93 vehicles in our database (uncommon). For safe wheel swaps on the 2010 Toyota Sequoia, donor rims must match the 5x150 PCD and have a center bore of at least 110.0 mm:
DIRECT HUB MATCH Same 5x150 Pattern & Exact 110.0mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2007 Toyota Tundra Regular Cab | 110.1 mm (Exact) | 60 | 14x1.5 (Flat/Mag) |
| 2006 Lexus GX | 110.1 mm (Exact) | 25 | N 12x1.50 (Flat/Mag) |
| 1996 Lexus LX | 110.1 mm (Exact) | 60 | N 14x1.50 (Flat/Mag) |
| 1998 Toyota Land Cruiser | 110.1 mm (Exact) | 60 | 14x1.5 (Flat/Mag) |
| 2008 Toyota Tundra CrewMax | 110.0 mm (Exact) | 60 | N 14x1.50 (Flat/Mag) |
| 2007 Toyota Tundra Double Cab | 110.1 mm (Exact) | 60 | 14x1.5 (Flat/Mag) |
Expert Buying Guide for 2010 Toyota Sequoia
For your 2010 Toyota Sequoia, ensure aftermarket wheels match the 5x150 bolt pattern and 110.0mm center bore. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 60mm; deviations affect handling and suspension clearance. Always use the correct lug nuts: M14x1.50 thread pitch with a conical (60-degree) seat. Ball-seat or incorrect thread nuts can loosen or damage the wheel. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Toyota Sequoia appears from 2001 to 2025 (25 model years). Across model years, this model appears with 2 bolt patterns (5x150, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 4
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 48.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 83 ft-lbs after 50-100 miles of driving.
- ✅ Avoid wheels with offset below 50mm or above 70mm to prevent rubbing or brake clearance issues.
- ✅ If using aftermarket wheels, verify hub-centric ring inner diameter matches 110.0mm and outer diameter matches wheel bore.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
2010 Toyota Sequoia — Frequently Asked Questions
What is the bolt pattern for a 2010 Toyota Sequoia?
The 2010 Toyota Sequoia uses a 5x150 bolt pattern (also called lug pattern or PCD). The center bore is 110.0mm and the offset is 60mm.
What other years of Toyota Sequoia have the same bolt pattern as the 2010?
The Toyota Sequoia uses the 5x150 pattern from 2009 through 2022. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
What lug nut size does the 2010 Toyota Sequoia use?
The 2010 Toyota Sequoia uses N 14x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Do 2010 Toyota Sequoias use lug bolts or lug nuts?
The 2010 Sequoia requires N 14x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I put aftermarket wheels on my 2010 Toyota Sequoia?
Absolutely. Just ensure the aftermarket wheels have a 5x150 bolt pattern, an offset near 60mm, and a center bore of at least 110.0mm (using hub rings if larger).
What is the factory wheel offset for a 2010 Toyota Sequoia?
The OEM offset for the 2010 Sequoia is typically around 60mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need Full Fitment Data in Bulk?
Stop scraping or looking up cars one by one. Import 12,400+ verified vehicle specs (1992–2025) directly into your Shopify store, inventory system, or custom automotive software.
Explore Master Database (CSV) →