2001 Toyota Sequoia Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 Toyota Sequoia, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 106.1 mm |
| Offset (ET) | 12 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2001 Sequoia — Year-Specific Fitment Context
The 2001 model year marks the beginning of the Toyota Sequoia's 6x139.7 bolt pattern era, which continued through 2024 (24 consecutive years). Wheels from any 2001–2024 Toyota Sequoia are cross-compatible with the 2001 model. Across its full production run (2001–2024), the Sequoia has also used: 5x150.
Toyota Sequoia Bolt Pattern by Year
The table below shows how the Sequoia's wheel specifications have changed over the years. The 2001 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2001 | 6x139.7 | 106.1 | 12 |
| 2002 | 6x139.7 | 106.1 | 12 |
| 2003 | 6x139.7 | 106.1 | 12 |
| 2004 | 6x139.7 | 106.1 | 12 |
| 2005 | 6x139.7 | 106.1 | 12 |
| 2006 | 6x139.7 | 106.1 | 12 |
| 2007 | 6x139.7 | 106.1 | 12 |
| 2008 | 6x139.7 | 106.1 | 12 |
| 2009 | 5x150 | 110.0 | 60 |
| 2010 | 5x150 | 110.0 | 60 |
| 2011 | 5x150 | 110.0 | 60 |
| 2012 | 5x150 | 110.0 | 60 |
| 2013 | 5x150 | 110.0 | 60 |
| 2014 | 5x150 | 110.0 | 60 |
| 2015 | 5x150 | 110.0 | 60 |
| 2016 | 5x150 | 110.0 | 60 |
| 2017 | 5x150 | 110.0 | 60 |
| 2018 | 5x150 | 110.1 | 60 |
| 2019 | 5x150 | 110.1 | 60 |
| 2020 | 5x150 | 110.1 | 60 |
| 2021 | 5x150 | 110.1 | 60 |
| 2022 | 5x150 | 110.1 | 60 |
| 2023 | 6x139.7 | 95.1 | 25 |
| 2024 | 6x139.7 | 95.1 | 25 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2001 Toyota Sequoia
For your 2001 Toyota Sequoia, the 6x139.7 bolt pattern is shared with 2001–2024 models, ensuring broad cross-compatibility. However, the 106.1mm center bore is critical: aftermarket wheels often have a larger bore (e.g., 108mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive; the factory spec is 12mm, but a range of 0–25mm is acceptable with careful fitment. Always verify lug nut thread pitch (12x1.50) and seat type—use conical (60-degree) or ball-seat nuts as specified by the wheel manufacturer. Never reuse old lug nuts with new wheels; improper seating can lead to wheel loss. Re-torque after 50–100 miles.
Historical Fitment Data Reference
In our dataset, Toyota Sequoia appears from 2001 to 2024 (24 model years). Across model years, this model appears with 2 bolt patterns (5x150, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 4
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 48.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings if aftermarket wheels have a bore larger than 106.1mm to avoid vibrations.
- ✅ Re-torque lug nuts to 100–110 ft-lbs after 50–100 miles of driving.
- ✅ Avoid using wheels from 5x150 bolt pattern Sequoias (2008–2022) without proper adapters.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2001 Toyota Sequoia — Frequently Asked Questions
What is the bolt pattern for a 2001 Toyota Sequoia?
The 2001 Toyota Sequoia uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 106.1mm and the offset is 12mm.
What other years of Toyota Sequoia have the same bolt pattern as the 2001?
The Toyota Sequoia uses the 6x139.7 pattern from 2001 through 2024. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2001 Toyota Sequoia?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 12mm, and a center bore of at least 106.1mm (using hub rings if larger).
What is the PCD for a 2001 Toyota Sequoia?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2001 Sequoia, the PCD is 6x139.7.
What is the center bore of a 2001 Toyota Sequoia?
The factory center bore (hub bore) for the 2001 Toyota Sequoia is 106.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Do 2001 Toyota Sequoias use lug bolts or lug nuts?
The 2001 Sequoia requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset