2017 Toyota Sequoia Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 Toyota Sequoia, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x150 |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 110.0 mm |
| Offset (ET) | 60 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2017 Sequoia — Year-Specific Fitment Context
The 2017 Toyota Sequoia is in year 9 of 14 using the 5x150 pattern (2009–2022). Wheels from any 2009–2022 Toyota Sequoia are cross-compatible with the 2017 model. Across its full production run (2001–2024), the Sequoia has also used: 6x139.7.
Toyota Sequoia Bolt Pattern by Year
The table below shows how the Sequoia's wheel specifications have changed over the years. The 2017 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 6x139.7 | 106.1 | 12 |
| 2002 | 6x139.7 | 106.1 | 12 |
| 2003 | 6x139.7 | 106.1 | 12 |
| 2004 | 6x139.7 | 106.1 | 12 |
| 2005 | 6x139.7 | 106.1 | 12 |
| 2006 | 6x139.7 | 106.1 | 12 |
| 2007 | 6x139.7 | 106.1 | 12 |
| 2008 | 6x139.7 | 106.1 | 12 |
| 2009 | 5x150 | 110.0 | 60 |
| 2010 | 5x150 | 110.0 | 60 |
| 2011 | 5x150 | 110.0 | 60 |
| 2012 | 5x150 | 110.0 | 60 |
| 2013 | 5x150 | 110.0 | 60 |
| 2014 | 5x150 | 110.0 | 60 |
| 2015 | 5x150 | 110.0 | 60 |
| 2016 | 5x150 | 110.0 | 60 |
| ▸ 2017 | 5x150 | 110.0 | 60 |
| 2018 | 5x150 | 110.1 | 60 |
| 2019 | 5x150 | 110.1 | 60 |
| 2020 | 5x150 | 110.1 | 60 |
| 2021 | 5x150 | 110.1 | 60 |
| 2022 | 5x150 | 110.1 | 60 |
| 2023 | 6x139.7 | 95.1 | 25 |
| 2024 | 6x139.7 | 95.1 | 25 |
5x150 Pattern Context
This bolt pattern appears on 93 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x150:
Expert Buying Guide for 2017 Toyota Sequoia
For your 2017 Toyota Sequoia, the critical center bore is 110.0mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibrations and ensure proper load transfer. The factory offset is 60mm; deviations beyond ±10mm may cause rubbing or clearance issues. Always use the correct lug nuts: M14x1.50 thread pitch with a conical (60-degree) seat. Never use ball-seat lug nuts, as they can loosen. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Toyota Sequoia appears from 2001 to 2024 (24 model years). Across model years, this model appears with 2 bolt patterns (5x150, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 4
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 48.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 83 ft-lbs after 50 miles of driving.
- ✅ If using aftermarket wheels, verify hub bore is ≥110.0mm and use hub-centric rings.
- ✅ Avoid spacers unless necessary; they alter offset and may require longer studs.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2017 Toyota Sequoia — Frequently Asked Questions
What is the bolt pattern for a 2017 Toyota Sequoia?
The 2017 Toyota Sequoia uses a 5x150 bolt pattern (also called lug pattern or PCD). The center bore is 110.0mm and the offset is 60mm.
What other years of Toyota Sequoia have the same bolt pattern as the 2017?
The Toyota Sequoia uses the 5x150 pattern from 2009 through 2022. Wheels from any of these model years are dimensionally compatible with the 2017, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2017 Toyota?
The 2017 Sequoia uses a 5x150 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Will wheels from another Toyota fit my 2017 Sequoia?
Only if they share the exact same 5x150 bolt pattern, a compatible offset, and a center bore equal to or larger than 110.0mm.
What is the PCD for a 2017 Toyota Sequoia?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2017 Sequoia, the PCD is 5x150.
What does 60mm offset mean for the 2017 Sequoia?
An offset of 60mm means the wheel's mounting surface is 60mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset