2007 Toyota Tundra Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Toyota Tundra Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x150 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 110.1 mm |
| Offset (ET) | 60 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2007 Tundra Regular Cab — Year-Specific Fitment Context
The 2007 model year marks the beginning of the Toyota Tundra Regular Cab's 5x150 bolt pattern era, which continued through 2017 (11 consecutive years). Wheels from any 2007–2017 Toyota Tundra Regular Cab are cross-compatible with the 2007 model. Note: the 2006 model used a different pattern (6x139.7), so its wheels are NOT interchangeable with the 2007. Across its full production run (2000–2017), the Tundra Regular Cab has also used: 6x139.7.
Toyota Tundra Regular Cab Bolt Pattern by Year
The table below shows how the Tundra Regular Cab's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 6x139.7 | 106.1 | 15 |
| 2001 | 6x139.7 | 106.1 | 15 |
| 2002 | 6x139.7 | 106.1 | 15 |
| 2003 | 6x139.7 | 106.1 | 15 |
| 2004 | 6x139.7 | 106.1 | 15 |
| 2005 | 6x139.7 | 106.1 | 15 |
| 2006 | 6x139.7 | 106.1 | 15 |
| ▸ 2007 | 5x150 | 110.1 | 60 |
| 2008 | 5x150 | 110.1 | 60 |
| 2009 | 5x150 | 110.1 | 60 |
| 2010 | 5x150 | 110.1 | 60 |
| 2011 | 5x150 | 110.1 | 60 |
| 2012 | 5x150 | 110.1 | 60 |
| 2013 | 5x150 | 110.1 | 60 |
| 2014 | 5x150 | 110.1 | 60 |
| 2015 | 5x150 | 110.1 | 60 |
| 2016 | 5x150 | 110.1 | 60 |
| 2017 | 5x150 | 110.1 | 60 |
5x150 Pattern Context
This bolt pattern appears on 93 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x150:
Expert Buying Guide for 2007 Toyota Tundra Regular Cab
For the 2007 Toyota Tundra Regular Cab, the 5x150 bolt pattern and 110.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 108mm or 112mm), requiring hub-centric rings to prevent vibration and ensure load is carried by the hub, not the lug nuts. Offset is sensitive; stock is 60mm. Using wheels with offset outside 50-70mm may cause rubbing or clearance issues with brakes/suspension. Always verify lug nut thread pitch (14x1.5) and seat type (cone seat for OEM; aftermarket may use ball or shank). Incorrect lug nuts can lead to wheel loosening. Safety first: improper fitment compromises vehicle control.
Historical Fitment Data Reference
In our dataset, Toyota Tundra Regular Cab appears from 2000 to 2017 (18 model years). Across model years, this model appears with 2 bolt patterns (5x150, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 45.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels from 2006 or earlier Tundra (6x139.7 pattern) as they are not compatible.
- ✅ Check brake caliper clearance when using aftermarket wheels; some designs may interfere with the 2007's larger brakes.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Toyota Tundra Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2007 Toyota Tundra Regular Cab?
The 2007 Toyota Tundra Regular Cab uses a 5x150 bolt pattern (also called lug pattern or PCD). The center bore is 110.1mm and the offset is 60mm.
What other years of Toyota Tundra Regular Cab have the same bolt pattern as the 2007?
The Toyota Tundra Regular Cab uses the 5x150 pattern from 2007 through 2017. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
Can I use 2006 Toyota Tundra Regular Cab wheels on a 2007?
No. The 2006 Tundra Regular Cab used a 6x139.7 bolt pattern, which differs from the 2007's 5x150. They are not interchangeable.
How do I measure the bolt pattern on my 2007 Toyota?
The 2007 Tundra Regular Cab uses a 5x150 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I use spacers on my 2007 Toyota Tundra Regular Cab?
Yes, but ensure the wheel spacers match the 5x150 bolt pattern and 110.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
What is the factory wheel offset for a 2007 Toyota Tundra Regular Cab?
The OEM offset for the 2007 Tundra Regular Cab is typically around 60mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset