2012 Toyota Tundra Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2012 Toyota Tundra Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x150 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 110.1 mm |
| Offset (ET) | 60 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2012 Tundra Regular Cab — Year-Specific Fitment Context
The 2012 Toyota Tundra Regular Cab is in year 6 of 11 using the 5x150 pattern (2007–2017). Wheels from any 2007–2017 Toyota Tundra Regular Cab are cross-compatible with the 2012 model. Across its full production run (2000–2017), the Tundra Regular Cab has also used: 6x139.7.
Toyota Tundra Regular Cab Bolt Pattern by Year
The table below shows how the Tundra Regular Cab's wheel specifications have changed over the years. The 2012 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 6x139.7 | 106.1 | 15 |
| 2001 | 6x139.7 | 106.1 | 15 |
| 2002 | 6x139.7 | 106.1 | 15 |
| 2003 | 6x139.7 | 106.1 | 15 |
| 2004 | 6x139.7 | 106.1 | 15 |
| 2005 | 6x139.7 | 106.1 | 15 |
| 2006 | 6x139.7 | 106.1 | 15 |
| 2007 | 5x150 | 110.1 | 60 |
| 2008 | 5x150 | 110.1 | 60 |
| 2009 | 5x150 | 110.1 | 60 |
| 2010 | 5x150 | 110.1 | 60 |
| 2011 | 5x150 | 110.1 | 60 |
| ▸ 2012 | 5x150 | 110.1 | 60 |
| 2013 | 5x150 | 110.1 | 60 |
| 2014 | 5x150 | 110.1 | 60 |
| 2015 | 5x150 | 110.1 | 60 |
| 2016 | 5x150 | 110.1 | 60 |
| 2017 | 5x150 | 110.1 | 60 |
5x150 Pattern Context
This bolt pattern appears on 93 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x150:
Expert Buying Guide for 2012 Toyota Tundra Regular Cab
When selecting wheels for your 2012 Toyota Tundra Regular Cab, the 5x150 bolt pattern and 110.1mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 60mm; deviations beyond ±10mm may cause rubbing or suspension interference. Always use lug nuts with the correct 14x1.5 thread pitch and a 60-degree conical seat (ball seat is incompatible). Failure to match these specs can lead to wheel detachment. For lifted trucks, offset adjustments may be needed, but maintain proper clearance.
Historical Fitment Data Reference
In our dataset, Toyota Tundra Regular Cab appears from 2000 to 2017 (18 model years). Across model years, this model appears with 2 bolt patterns (5x150, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 45.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 154 ft-lb after 50 miles of driving to ensure proper seating.
- ✅ Avoid using wheels from 2000-2006 Tundras (6x139.7 pattern) without adapters; they are not cross-compatible.
- ✅ If installing aftermarket wheels, verify hub bore diameter and use hub-centric rings to prevent steering wheel vibration.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2012 Toyota Tundra Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2012 Toyota Tundra Regular Cab?
The 2012 Toyota Tundra Regular Cab uses a 5x150 bolt pattern (also called lug pattern or PCD). The center bore is 110.1mm and the offset is 60mm.
What other years of Toyota Tundra Regular Cab have the same bolt pattern as the 2012?
The Toyota Tundra Regular Cab uses the 5x150 pattern from 2007 through 2017. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.
Why is matching the 110.1mm center bore important for the 2012 Tundra Regular Cab?
The 110.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Will wheels from another Toyota fit my 2012 Tundra Regular Cab?
Only if they share the exact same 5x150 bolt pattern, a compatible offset, and a center bore equal to or larger than 110.1mm.
What is the factory wheel offset for a 2012 Toyota Tundra Regular Cab?
The OEM offset for the 2012 Tundra Regular Cab is typically around 60mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Do 2012 Toyota Tundra Regular Cabs use lug bolts or lug nuts?
The 2012 Tundra Regular Cab requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset