2010 Toyota Tundra Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Toyota Tundra Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x150 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 110.1 mm |
| Offset (ET) | 60 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2010 Tundra Regular Cab — Year-Specific Fitment Context
The 2010 Toyota Tundra Regular Cab is in year 4 of 11 using the 5x150 pattern (2007–2017). Wheels from any 2007–2017 Toyota Tundra Regular Cab are cross-compatible with the 2010 model. Across its full production run (2000–2017), the Tundra Regular Cab has also used: 6x139.7.
Toyota Tundra Regular Cab Bolt Pattern by Year
The table below shows how the Tundra Regular Cab's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 6x139.7 | 106.1 | 15 |
| 2001 | 6x139.7 | 106.1 | 15 |
| 2002 | 6x139.7 | 106.1 | 15 |
| 2003 | 6x139.7 | 106.1 | 15 |
| 2004 | 6x139.7 | 106.1 | 15 |
| 2005 | 6x139.7 | 106.1 | 15 |
| 2006 | 6x139.7 | 106.1 | 15 |
| 2007 | 5x150 | 110.1 | 60 |
| 2008 | 5x150 | 110.1 | 60 |
| 2009 | 5x150 | 110.1 | 60 |
| ▸ 2010 | 5x150 | 110.1 | 60 |
| 2011 | 5x150 | 110.1 | 60 |
| 2012 | 5x150 | 110.1 | 60 |
| 2013 | 5x150 | 110.1 | 60 |
| 2014 | 5x150 | 110.1 | 60 |
| 2015 | 5x150 | 110.1 | 60 |
| 2016 | 5x150 | 110.1 | 60 |
| 2017 | 5x150 | 110.1 | 60 |
5x150 Pattern Context
This bolt pattern appears on 93 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x150:
Expert Buying Guide for 2010 Toyota Tundra Regular Cab
For your 2010 Toyota Tundra Regular Cab, the bolt pattern is 5x150 with a center bore of 110.1mm. Aftermarket wheels often have a larger bore, so hub-centric rings are essential to prevent vibrations and ensure proper load distribution. The factory offset is 60mm; deviations beyond ±10mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (14x1.5) and seat type (conical/60-degree). Using incorrect lug nuts can lead to wheel loosening or damage. Verify that aftermarket wheels are hub-centric or use rings, and confirm offset compatibility to maintain safety and performance.
Historical Fitment Data Reference
In our dataset, Toyota Tundra Regular Cab appears from 2000 to 2017 (18 model years). Across model years, this model appears with 2 bolt patterns (5x150, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 45.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid wheels with offset below 50mm or above 70mm to prevent rubbing on suspension or body.
- ✅ Check that aftermarket wheels have a center bore large enough for hub-centric rings; never rely solely on lug nuts for centering.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Toyota Tundra Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2010 Toyota Tundra Regular Cab?
The 2010 Toyota Tundra Regular Cab uses a 5x150 bolt pattern (also called lug pattern or PCD). The center bore is 110.1mm and the offset is 60mm.
What other years of Toyota Tundra Regular Cab have the same bolt pattern as the 2010?
The Toyota Tundra Regular Cab uses the 5x150 pattern from 2007 through 2017. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
Can I use spacers on my 2010 Toyota Tundra Regular Cab?
Yes, but ensure the wheel spacers match the 5x150 bolt pattern and 110.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
How tight should I torque the lug nuts on a 2010 Toyota Tundra Regular Cab?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the factory wheel offset for a 2010 Toyota Tundra Regular Cab?
The OEM offset for the 2010 Tundra Regular Cab is typically around 60mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2010 Toyota Tundra Regular Cab?
The factory center bore (hub bore) for the 2010 Toyota Tundra Regular Cab is 110.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset