2018 Toyota Tundra CrewMax Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Toyota Tundra CrewMax, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x150 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 110.1 mm |
| Offset (ET) | 60 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2018 Tundra CrewMax — Year-Specific Fitment Context
The 2018 Toyota Tundra CrewMax is in year 11 of 14 using the 5x150 pattern (2008–2021). Wheels from any 2008–2021 Toyota Tundra CrewMax are cross-compatible with the 2018 model. Across its full production run (2007–2024), the Tundra CrewMax has also used: 6x139.7.
Toyota Tundra CrewMax Bolt Pattern by Year
The table below shows how the Tundra CrewMax's wheel specifications have changed over the years. The 2018 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2007 | 6x139.7 | 106.1 | 12 |
| 2008 | 5x150 | 110.0 | 60 |
| 2009 | 5x150 | 110.0 | 60 |
| 2010 | 5x150 | 110.0 | 60 |
| 2011 | 5x150 | 110.0 | 60 |
| 2012 | 5x150 | 110.0 | 60 |
| 2013 | 5x150 | 110.0 | 60 |
| 2014 | 5x150 | 110.0 | 60 |
| 2015 | 5x150 | 110.0 | 60 |
| 2016 | 5x150 | 110.0 | 60 |
| 2017 | 5x150 | 110.0 | 60 |
| ▸ 2018 | 5x150 | 110.1 | 60 |
| 2019 | 5x150 | 110.1 | 60 |
| 2020 | 5x150 | 110.1 | 60 |
| 2021 | 5x150 | 110.1 | 60 |
| 2022 | 6x139.7 | 95.1 | 60 |
| 2023 | 6x139.7 | 95.1 | 60 |
| 2024 | 6x139.7 | 95.1 | 60 |
5x150 Pattern Context
This bolt pattern appears on 93 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x150:
Expert Buying Guide for 2018 Toyota Tundra CrewMax
For the 2018 Toyota Tundra CrewMax, the critical fitment specs are: bolt pattern 5x150, center bore 110.1mm, offset 60mm, and lug nut size 14x1.5. The center bore is hub-centric, meaning aftermarket wheels must either match this bore exactly or use hub-centric rings to prevent vibration and ensure proper load distribution. Offset is sensitive; staying within ±5mm of 60mm is recommended to avoid rubbing or clearance issues. Always verify lug nut seat type—factory uses conical (60-degree) seats. Using incorrect seat type can cause wheel loosening. Wheels from 2008–2021 Tundra CrewMax models are direct fit.
Historical Fitment Data Reference
In our dataset, Toyota Tundra CrewMax appears from 2007 to 2024 (18 model years). Across model years, this model appears with 2 bolt patterns (5x150, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 4
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 48.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal lug nuts; always use 14x1.5 conical seat nuts specific to Toyota.
- ✅ Check brake caliper clearance when changing offset, as the Tundra has large brakes.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2018 Toyota Tundra CrewMax — Frequently Asked Questions
What is the bolt pattern for a 2018 Toyota Tundra CrewMax?
The 2018 Toyota Tundra CrewMax uses a 5x150 bolt pattern (also called lug pattern or PCD). The center bore is 110.1mm and the offset is 60mm.
What other years of Toyota Tundra CrewMax have the same bolt pattern as the 2018?
The Toyota Tundra CrewMax uses the 5x150 pattern from 2008 through 2021. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
What is the PCD for a 2018 Toyota Tundra CrewMax?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2018 Tundra CrewMax, the PCD is 5x150.
How do I measure the bolt pattern on my 2018 Toyota?
The 2018 Tundra CrewMax uses a 5x150 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Do 2018 Toyota Tundra CrewMaxs use lug bolts or lug nuts?
The 2018 Tundra CrewMax requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What lug nut size does the 2018 Toyota Tundra CrewMax use?
The 2018 Toyota Tundra CrewMax uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset