2024 Toyota Tundra CrewMax Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Toyota Tundra CrewMax, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 95.1 mm |
| Offset (ET) | 60 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2024 Tundra CrewMax — Year-Specific Fitment Context
The 2024 model year is the final year of the Toyota Tundra CrewMax's 6x139.7 bolt pattern run (since 2007). Wheels from any 2007–2024 Toyota Tundra CrewMax are cross-compatible with the 2024 model. Across its full production run (2007–2024), the Tundra CrewMax has also used: 5x150.
Toyota Tundra CrewMax Bolt Pattern by Year
The table below shows how the Tundra CrewMax's wheel specifications have changed over the years. The 2024 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2007 | 6x139.7 | 106.1 | 12 |
| 2008 | 5x150 | 110.0 | 60 |
| 2009 | 5x150 | 110.0 | 60 |
| 2010 | 5x150 | 110.0 | 60 |
| 2011 | 5x150 | 110.0 | 60 |
| 2012 | 5x150 | 110.0 | 60 |
| 2013 | 5x150 | 110.0 | 60 |
| 2014 | 5x150 | 110.0 | 60 |
| 2015 | 5x150 | 110.0 | 60 |
| 2016 | 5x150 | 110.0 | 60 |
| 2017 | 5x150 | 110.0 | 60 |
| 2018 | 5x150 | 110.1 | 60 |
| 2019 | 5x150 | 110.1 | 60 |
| 2020 | 5x150 | 110.1 | 60 |
| 2021 | 5x150 | 110.1 | 60 |
| 2022 | 6x139.7 | 95.1 | 60 |
| 2023 | 6x139.7 | 95.1 | 60 |
| ▸ 2024 | 6x139.7 | 95.1 | 60 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2024 Toyota Tundra CrewMax
For the 2024 Toyota Tundra CrewMax, the 6x139.7 bolt pattern and 95.1mm center bore are critical. Aftermarket wheels must have a center bore of at least 95.1mm; use hub-centric rings to avoid vibration. The factory offset is 60mm; deviations affect clearance and load capacity. Always verify lug nut thread pitch (14x1.5) and seat type—factory uses conical (60-degree) seats. Never mix seat types. Re-torque after 50-100 miles. Wheels from 2007-2024 Tundra CrewMax are compatible, but avoid 5x150 patterns from other trims.
Historical Fitment Data Reference
In our dataset, Toyota Tundra CrewMax appears from 2007 to 2024 (18 model years). Across model years, this model appears with 2 bolt patterns (5x150, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 4
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 48.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheel bore exceeds 95.1mm to prevent vibration and stress on studs.
- ✅ Re-torque lug nuts to 154 ft-lb after 50-100 miles; never use impact wrench for final tightening.
- ✅ Verify wheel offset stays within 50-70mm to avoid rubbing on suspension or fenders; lower offset may require spacers.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Toyota Tundra CrewMax — Frequently Asked Questions
What is the bolt pattern for a 2024 Toyota Tundra CrewMax?
The 2024 Toyota Tundra CrewMax uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 95.1mm and the offset is 60mm.
What other years of Toyota Tundra CrewMax have the same bolt pattern as the 2024?
The Toyota Tundra CrewMax uses the 6x139.7 pattern from 2007 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
Can I use spacers on my 2024 Toyota Tundra CrewMax?
Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 95.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
What lug nut size does the 2024 Toyota Tundra CrewMax use?
The 2024 Toyota Tundra CrewMax uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2024 Toyota Tundra CrewMax?
The OEM offset for the 2024 Tundra CrewMax is typically around 60mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2024 Toyota Tundra CrewMax?
The factory center bore (hub bore) for the 2024 Toyota Tundra CrewMax is 95.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset