2019 Toyota Tundra CrewMax Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Toyota Tundra CrewMax, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x150 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 110.1 mm |
| Offset (ET) | 60 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2019 Tundra CrewMax — Year-Specific Fitment Context
The 2019 Toyota Tundra CrewMax is in year 12 of 14 using the 5x150 pattern (2008–2021). Wheels from any 2008–2021 Toyota Tundra CrewMax are cross-compatible with the 2019 model. Across its full production run (2007–2024), the Tundra CrewMax has also used: 6x139.7.
Toyota Tundra CrewMax Bolt Pattern by Year
The table below shows how the Tundra CrewMax's wheel specifications have changed over the years. The 2019 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2007 | 6x139.7 | 106.1 | 12 |
| 2008 | 5x150 | 110.0 | 60 |
| 2009 | 5x150 | 110.0 | 60 |
| 2010 | 5x150 | 110.0 | 60 |
| 2011 | 5x150 | 110.0 | 60 |
| 2012 | 5x150 | 110.0 | 60 |
| 2013 | 5x150 | 110.0 | 60 |
| 2014 | 5x150 | 110.0 | 60 |
| 2015 | 5x150 | 110.0 | 60 |
| 2016 | 5x150 | 110.0 | 60 |
| 2017 | 5x150 | 110.0 | 60 |
| 2018 | 5x150 | 110.1 | 60 |
| ▸ 2019 | 5x150 | 110.1 | 60 |
| 2020 | 5x150 | 110.1 | 60 |
| 2021 | 5x150 | 110.1 | 60 |
| 2022 | 6x139.7 | 95.1 | 60 |
| 2023 | 6x139.7 | 95.1 | 60 |
| 2024 | 6x139.7 | 95.1 | 60 |
5x150 Pattern Context
This bolt pattern appears on 93 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x150:
Expert Buying Guide for 2019 Toyota Tundra CrewMax
For your 2019 Toyota Tundra CrewMax, the bolt pattern is 5x150 with a center bore of 110.1mm. When selecting aftermarket wheels, hub-centric rings are essential to match the bore precisely, preventing vibrations and ensuring proper load distribution. The factory offset is 60mm; deviations beyond ±10mm may cause rubbing or clearance issues with suspension and brakes. Always use lug nuts with the correct thread pitch (14x1.5) and seat type (conical/60-degree taper) to avoid wheel loosening. Verify that aftermarket wheels are hub-centric or use rings, and check for caliper clearance. Safety first: improper fitment can lead to wheel detachment.
Historical Fitment Data Reference
In our dataset, Toyota Tundra CrewMax appears from 2007 to 2024 (18 model years). Across model years, this model appears with 2 bolt patterns (5x150, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 4
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 48.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid wheels with offset below 50mm or above 70mm to prevent rubbing on control arms or fenders.
- ✅ Use only conical seat lug nuts (60-degree taper) for aftermarket wheels; ball seat or shank-style nuts are incompatible.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Toyota Tundra CrewMax — Frequently Asked Questions
What is the bolt pattern for a 2019 Toyota Tundra CrewMax?
The 2019 Toyota Tundra CrewMax uses a 5x150 bolt pattern (also called lug pattern or PCD). The center bore is 110.1mm and the offset is 60mm.
What other years of Toyota Tundra CrewMax have the same bolt pattern as the 2019?
The Toyota Tundra CrewMax uses the 5x150 pattern from 2008 through 2021. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
Can I use spacers on my 2019 Toyota Tundra CrewMax?
Yes, but ensure the wheel spacers match the 5x150 bolt pattern and 110.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Why is matching the 110.1mm center bore important for the 2019 Tundra CrewMax?
The 110.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Do 2019 Toyota Tundra CrewMaxs use lug bolts or lug nuts?
The 2019 Tundra CrewMax requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What lug nut size does the 2019 Toyota Tundra CrewMax use?
The 2019 Toyota Tundra CrewMax uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset