2011 Toyota Tundra CrewMax Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Toyota Tundra CrewMax, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x150 |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 110.0 mm |
| Offset (ET) | 60 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2011 Tundra CrewMax — Year-Specific Fitment Context
The 2011 Toyota Tundra CrewMax is in year 4 of 14 using the 5x150 pattern (2008–2021). Wheels from any 2008–2021 Toyota Tundra CrewMax are cross-compatible with the 2011 model. Across its full production run (2007–2024), the Tundra CrewMax has also used: 6x139.7.
Toyota Tundra CrewMax Bolt Pattern by Year
The table below shows how the Tundra CrewMax's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2007 | 6x139.7 | 106.1 | 12 |
| 2008 | 5x150 | 110.0 | 60 |
| 2009 | 5x150 | 110.0 | 60 |
| 2010 | 5x150 | 110.0 | 60 |
| ▸ 2011 | 5x150 | 110.0 | 60 |
| 2012 | 5x150 | 110.0 | 60 |
| 2013 | 5x150 | 110.0 | 60 |
| 2014 | 5x150 | 110.0 | 60 |
| 2015 | 5x150 | 110.0 | 60 |
| 2016 | 5x150 | 110.0 | 60 |
| 2017 | 5x150 | 110.0 | 60 |
| 2018 | 5x150 | 110.1 | 60 |
| 2019 | 5x150 | 110.1 | 60 |
| 2020 | 5x150 | 110.1 | 60 |
| 2021 | 5x150 | 110.1 | 60 |
| 2022 | 6x139.7 | 95.1 | 60 |
| 2023 | 6x139.7 | 95.1 | 60 |
| 2024 | 6x139.7 | 95.1 | 60 |
5x150 Pattern Context
This bolt pattern appears on 93 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x150:
Expert Buying Guide for 2011 Toyota Tundra CrewMax
For your 2011 Toyota Tundra CrewMax, the 5x150 bolt pattern and 110.0mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 110.3mm), requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lug nuts. Offset is sensitive: stock is 60mm; deviations affect scrub radius and clearance. Stick within ±10mm to avoid rubbing or steering issues. Always use the correct lug nuts: 14x1.50 thread pitch with a conical (60-degree) seat. Never use ball-seat lug nuts—they can loosen. Re-torque after 50-100 miles to maintain clamping force.
Historical Fitment Data Reference
In our dataset, Toyota Tundra CrewMax appears from 2007 to 2024 (18 model years). Across model years, this model appears with 2 bolt patterns (5x150, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 4
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 48.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 83 ft-lb after 50-100 miles of driving.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to match the 110.0mm center bore.
- ✅ Avoid wheels with offset below 50mm or above 70mm to prevent rubbing on suspension or body panels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Toyota Tundra CrewMax — Frequently Asked Questions
What is the bolt pattern for a 2011 Toyota Tundra CrewMax?
The 2011 Toyota Tundra CrewMax uses a 5x150 bolt pattern (also called lug pattern or PCD). The center bore is 110.0mm and the offset is 60mm.
What other years of Toyota Tundra CrewMax have the same bolt pattern as the 2011?
The Toyota Tundra CrewMax uses the 5x150 pattern from 2008 through 2021. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2011 Toyota?
The 2011 Tundra CrewMax uses a 5x150 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What does 60mm offset mean for the 2011 Tundra CrewMax?
An offset of 60mm means the wheel's mounting surface is 60mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
What is the PCD for a 2011 Toyota Tundra CrewMax?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2011 Tundra CrewMax, the PCD is 5x150.
What is the center bore of a 2011 Toyota Tundra CrewMax?
The factory center bore (hub bore) for the 2011 Toyota Tundra CrewMax is 110.0mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset