2008 Toyota Tundra CrewMax Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Toyota Tundra CrewMax, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x150 |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 110.0 mm |
| Offset (ET) | 60 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2008 Tundra CrewMax — Year-Specific Fitment Context
The 2008 model year marks the beginning of the Toyota Tundra CrewMax's 5x150 bolt pattern era, which continued through 2021 (14 consecutive years). Wheels from any 2008–2021 Toyota Tundra CrewMax are cross-compatible with the 2008 model. Note: the 2007 model used a different pattern (6x139.7), so its wheels are NOT interchangeable with the 2008. Across its full production run (2007–2024), the Tundra CrewMax has also used: 6x139.7.
Toyota Tundra CrewMax Bolt Pattern by Year
The table below shows how the Tundra CrewMax's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2007 | 6x139.7 | 106.1 | 12 |
| ▸ 2008 | 5x150 | 110.0 | 60 |
| 2009 | 5x150 | 110.0 | 60 |
| 2010 | 5x150 | 110.0 | 60 |
| 2011 | 5x150 | 110.0 | 60 |
| 2012 | 5x150 | 110.0 | 60 |
| 2013 | 5x150 | 110.0 | 60 |
| 2014 | 5x150 | 110.0 | 60 |
| 2015 | 5x150 | 110.0 | 60 |
| 2016 | 5x150 | 110.0 | 60 |
| 2017 | 5x150 | 110.0 | 60 |
| 2018 | 5x150 | 110.1 | 60 |
| 2019 | 5x150 | 110.1 | 60 |
| 2020 | 5x150 | 110.1 | 60 |
| 2021 | 5x150 | 110.1 | 60 |
| 2022 | 6x139.7 | 95.1 | 60 |
| 2023 | 6x139.7 | 95.1 | 60 |
| 2024 | 6x139.7 | 95.1 | 60 |
Fitment Notes
The 2008 Toyota Tundra CrewMax has a bolt pattern of 5x150.
This means it is a 5 lug pattern with a circle diameter of 150mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Toyota Tundra CrewMax appears from 2007 to 2024 (18 model years).
Across model years, this model appears with 2 bolt patterns (5x150, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 4
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 48.0 mm
5x150 Pattern Context
This bolt pattern appears on 93 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x150:
2008 Toyota Tundra CrewMax — Frequently Asked Questions
What is the bolt pattern for a 2008 Toyota Tundra CrewMax?
The 2008 Toyota Tundra CrewMax uses a 5x150 bolt pattern (also called lug pattern or PCD). The center bore is 110.0mm and the offset is 60mm.
What other years of Toyota Tundra CrewMax have the same bolt pattern as the 2008?
The Toyota Tundra CrewMax uses the 5x150 pattern from 2008 through 2021. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Can I use 2007 Toyota Tundra CrewMax wheels on a 2008?
No. The 2007 Tundra CrewMax used a 6x139.7 bolt pattern, which differs from the 2008's 5x150. They are not interchangeable.
Will wheels from another Toyota fit my 2008 Tundra CrewMax?
Only if they share the exact same 5x150 bolt pattern, a compatible offset, and a center bore equal to or larger than 110.0mm.
Can I put aftermarket wheels on my 2008 Toyota Tundra CrewMax?
Absolutely. Just ensure the aftermarket wheels have a 5x150 bolt pattern, an offset near 60mm, and a center bore of at least 110.0mm (using hub rings if larger).
What is the factory wheel offset for a 2008 Toyota Tundra CrewMax?
The OEM offset for the 2008 Tundra CrewMax is typically around 60mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Fitment Checklist Before You Buy Wheels
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Editorial Fitment Notes
Toyota Tundra CrewMax has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 2007-2024 (18 model years).
- Observed bolt-pattern variants: 2 (5x150, 6x139.7).
- Observed total offset span across years: 48.0 mm.
- Observed center-bore variants: 4 | lug-size variants: 3.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2008 Toyota Tundra CrewMax, please report it via our About page contact so we can verify and update this record.