2015 Toyota Tundra CrewMax Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2015 Toyota Tundra CrewMax, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x150 |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 110.0 mm |
| Offset (ET) | 60 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2015 Tundra CrewMax — Year-Specific Fitment Context
The 2015 Toyota Tundra CrewMax is in year 8 of 14 using the 5x150 pattern (2008–2021). Wheels from any 2008–2021 Toyota Tundra CrewMax are cross-compatible with the 2015 model. Across its full production run (2007–2024), the Tundra CrewMax has also used: 6x139.7.
Toyota Tundra CrewMax Bolt Pattern by Year
The table below shows how the Tundra CrewMax's wheel specifications have changed over the years. The 2015 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2007 | 6x139.7 | 106.1 | 12 |
| 2008 | 5x150 | 110.0 | 60 |
| 2009 | 5x150 | 110.0 | 60 |
| 2010 | 5x150 | 110.0 | 60 |
| 2011 | 5x150 | 110.0 | 60 |
| 2012 | 5x150 | 110.0 | 60 |
| 2013 | 5x150 | 110.0 | 60 |
| 2014 | 5x150 | 110.0 | 60 |
| ▸ 2015 | 5x150 | 110.0 | 60 |
| 2016 | 5x150 | 110.0 | 60 |
| 2017 | 5x150 | 110.0 | 60 |
| 2018 | 5x150 | 110.1 | 60 |
| 2019 | 5x150 | 110.1 | 60 |
| 2020 | 5x150 | 110.1 | 60 |
| 2021 | 5x150 | 110.1 | 60 |
| 2022 | 6x139.7 | 95.1 | 60 |
| 2023 | 6x139.7 | 95.1 | 60 |
| 2024 | 6x139.7 | 95.1 | 60 |
5x150 Pattern Context
This bolt pattern appears on 93 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x150:
Expert Buying Guide for 2015 Toyota Tundra CrewMax
For your 2015 Toyota Tundra CrewMax, the 5x150 bolt pattern and 110.0mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 110.3mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 60mm; deviations beyond ±10mm may cause rubbing or suspension interference. Always use the correct lug nuts: 14x1.50 thread pitch with a conical (60-degree) seat. Never use ball-seat lug nuts, as they can loosen. Re-torque after 50-100 miles. Wheels from 2008-2021 Tundra CrewMax models are direct fit.
Historical Fitment Data Reference
In our dataset, Toyota Tundra CrewMax appears from 2007 to 2024 (18 model years). Across model years, this model appears with 2 bolt patterns (5x150, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 4
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 48.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a bore larger than 110.0mm to avoid vibration.
- ✅ Stick within 50-70mm offset range; lower offset (e.g., 40mm) may rub on fenders, higher (e.g., 70mm) may contact suspension.
- ✅ Re-torque lug nuts to 154 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2015 Toyota Tundra CrewMax — Frequently Asked Questions
What is the bolt pattern for a 2015 Toyota Tundra CrewMax?
The 2015 Toyota Tundra CrewMax uses a 5x150 bolt pattern (also called lug pattern or PCD). The center bore is 110.0mm and the offset is 60mm.
What other years of Toyota Tundra CrewMax have the same bolt pattern as the 2015?
The Toyota Tundra CrewMax uses the 5x150 pattern from 2008 through 2021. Wheels from any of these model years are dimensionally compatible with the 2015, provided the offset and center bore also match.
Why is matching the 110.0mm center bore important for the 2015 Tundra CrewMax?
The 110.0mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What lug nut size does the 2015 Toyota Tundra CrewMax use?
The 2015 Toyota Tundra CrewMax uses N 14x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2015 Toyota Tundra CrewMax?
The OEM offset for the 2015 Tundra CrewMax is typically around 60mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2015 Toyota?
The 2015 Tundra CrewMax uses a 5x150 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset