2018 Toyota Sequoia Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Toyota Sequoia, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x150 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 110.1 mm |
| Offset (ET) | 60 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2018 Sequoia — Year-Specific Fitment Context
The 2018 Toyota Sequoia is in year 10 of 14 using the 5x150 pattern (2009–2022). Wheels from any 2009–2022 Toyota Sequoia are cross-compatible with the 2018 model. Across its full production run (2001–2024), the Sequoia has also used: 6x139.7.
Toyota Sequoia Bolt Pattern by Year
The table below shows how the Sequoia's wheel specifications have changed over the years. The 2018 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 6x139.7 | 106.1 | 12 |
| 2002 | 6x139.7 | 106.1 | 12 |
| 2003 | 6x139.7 | 106.1 | 12 |
| 2004 | 6x139.7 | 106.1 | 12 |
| 2005 | 6x139.7 | 106.1 | 12 |
| 2006 | 6x139.7 | 106.1 | 12 |
| 2007 | 6x139.7 | 106.1 | 12 |
| 2008 | 6x139.7 | 106.1 | 12 |
| 2009 | 5x150 | 110.0 | 60 |
| 2010 | 5x150 | 110.0 | 60 |
| 2011 | 5x150 | 110.0 | 60 |
| 2012 | 5x150 | 110.0 | 60 |
| 2013 | 5x150 | 110.0 | 60 |
| 2014 | 5x150 | 110.0 | 60 |
| 2015 | 5x150 | 110.0 | 60 |
| 2016 | 5x150 | 110.0 | 60 |
| 2017 | 5x150 | 110.0 | 60 |
| ▸ 2018 | 5x150 | 110.1 | 60 |
| 2019 | 5x150 | 110.1 | 60 |
| 2020 | 5x150 | 110.1 | 60 |
| 2021 | 5x150 | 110.1 | 60 |
| 2022 | 5x150 | 110.1 | 60 |
| 2023 | 6x139.7 | 95.1 | 25 |
| 2024 | 6x139.7 | 95.1 | 25 |
5x150 Pattern Context
This bolt pattern appears on 93 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x150:
Expert Buying Guide for 2018 Toyota Sequoia
The 2018 Toyota Sequoia uses a 5x150 bolt pattern with a 110.1mm center bore. When selecting aftermarket wheels, hub-centric rings are essential to match the exact bore, preventing vibrations and ensuring proper load distribution. The factory offset is 60mm; deviations beyond ±10mm may cause rubbing or clearance issues. Always use lug nuts with the correct 14x1.5 thread pitch and a conical (60-degree) seat—ball seat or incorrect pitch can lead to wheel loss. Re-torque after 50-100 miles. Wheels from 2009-2022 Sequoias are direct fit.
Historical Fitment Data Reference
In our dataset, Toyota Sequoia appears from 2001 to 2024 (24 model years). Across model years, this model appears with 2 bolt patterns (5x150, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 4
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 48.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 83 ft-lb after 50-100 miles of driving.
- ✅ Avoid wheels with offset below 50mm or above 70mm to prevent rubbing on suspension or body.
- ✅ Verify aftermarket wheels include hub-centric rings for the 110.1mm bore; otherwise, vibrations may occur.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2018 Toyota Sequoia — Frequently Asked Questions
What is the bolt pattern for a 2018 Toyota Sequoia?
The 2018 Toyota Sequoia uses a 5x150 bolt pattern (also called lug pattern or PCD). The center bore is 110.1mm and the offset is 60mm.
What other years of Toyota Sequoia have the same bolt pattern as the 2018?
The Toyota Sequoia uses the 5x150 pattern from 2009 through 2022. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
Can I use spacers on my 2018 Toyota Sequoia?
Yes, but ensure the wheel spacers match the 5x150 bolt pattern and 110.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
What does 60mm offset mean for the 2018 Sequoia?
An offset of 60mm means the wheel's mounting surface is 60mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
What is the factory wheel offset for a 2018 Toyota Sequoia?
The OEM offset for the 2018 Sequoia is typically around 60mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 2018 Toyota Sequoia?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2018 Sequoia, the PCD is 5x150.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset