2003 Toyota Sequoia Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2003 Toyota Sequoia, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 106.1 mm |
| Offset (ET) | 12 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2003 Sequoia — Year-Specific Fitment Context
The 2003 Toyota Sequoia is in year 3 of 24 using the 6x139.7 pattern (2001–2024). Wheels from any 2001–2024 Toyota Sequoia are cross-compatible with the 2003 model. Across its full production run (2001–2024), the Sequoia has also used: 5x150.
Toyota Sequoia Bolt Pattern by Year
The table below shows how the Sequoia's wheel specifications have changed over the years. The 2003 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 6x139.7 | 106.1 | 12 |
| 2002 | 6x139.7 | 106.1 | 12 |
| ▸ 2003 | 6x139.7 | 106.1 | 12 |
| 2004 | 6x139.7 | 106.1 | 12 |
| 2005 | 6x139.7 | 106.1 | 12 |
| 2006 | 6x139.7 | 106.1 | 12 |
| 2007 | 6x139.7 | 106.1 | 12 |
| 2008 | 6x139.7 | 106.1 | 12 |
| 2009 | 5x150 | 110.0 | 60 |
| 2010 | 5x150 | 110.0 | 60 |
| 2011 | 5x150 | 110.0 | 60 |
| 2012 | 5x150 | 110.0 | 60 |
| 2013 | 5x150 | 110.0 | 60 |
| 2014 | 5x150 | 110.0 | 60 |
| 2015 | 5x150 | 110.0 | 60 |
| 2016 | 5x150 | 110.0 | 60 |
| 2017 | 5x150 | 110.0 | 60 |
| 2018 | 5x150 | 110.1 | 60 |
| 2019 | 5x150 | 110.1 | 60 |
| 2020 | 5x150 | 110.1 | 60 |
| 2021 | 5x150 | 110.1 | 60 |
| 2022 | 5x150 | 110.1 | 60 |
| 2023 | 6x139.7 | 95.1 | 25 |
| 2024 | 6x139.7 | 95.1 | 25 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2003 Toyota Sequoia
For your 2003 Toyota Sequoia, the 6x139.7 bolt pattern is shared with 2001–2024 models, ensuring broad cross-compatibility. However, the 106.1mm center bore is critical: aftermarket wheels often have larger bores, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive—stick to a 12mm range to avoid rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (conical/60-degree taper); ball-seat nuts are unsafe. Re-torque after 50–100 miles. Avoid spacers unless hub-centric; they can alter offset and stress bearings.
Historical Fitment Data Reference
In our dataset, Toyota Sequoia appears from 2001 to 2024 (24 model years). Across model years, this model appears with 2 bolt patterns (5x150, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 4
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 48.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 83 ft-lbs after 50–100 miles of driving.
- ✅ Verify wheel bore diameter; use hub-centric rings if bore >106.1mm.
- ✅ Check offset carefully: +12mm is stock; deviations beyond ±12mm may cause rubbing or clearance issues.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2003 Toyota Sequoia — Frequently Asked Questions
What is the bolt pattern for a 2003 Toyota Sequoia?
The 2003 Toyota Sequoia uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 106.1mm and the offset is 12mm.
What other years of Toyota Sequoia have the same bolt pattern as the 2003?
The Toyota Sequoia uses the 6x139.7 pattern from 2001 through 2024. Wheels from any of these model years are dimensionally compatible with the 2003, provided the offset and center bore also match.
What does 12mm offset mean for the 2003 Sequoia?
An offset of 12mm means the wheel's mounting surface is 12mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
Do 2003 Toyota Sequoias use lug bolts or lug nuts?
The 2003 Sequoia requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Will wheels from another Toyota fit my 2003 Sequoia?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 106.1mm.
Can I put aftermarket wheels on my 2003 Toyota Sequoia?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 12mm, and a center bore of at least 106.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset