2006 Toyota Sequoia Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Toyota Sequoia, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 106.1 mm |
| Offset (ET) | 12 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2006 Sequoia — Year-Specific Fitment Context
The 2006 Toyota Sequoia is in year 6 of 24 using the 6x139.7 pattern (2001–2024). Wheels from any 2001–2024 Toyota Sequoia are cross-compatible with the 2006 model. Across its full production run (2001–2024), the Sequoia has also used: 5x150.
Toyota Sequoia Bolt Pattern by Year
The table below shows how the Sequoia's wheel specifications have changed over the years. The 2006 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 6x139.7 | 106.1 | 12 |
| 2002 | 6x139.7 | 106.1 | 12 |
| 2003 | 6x139.7 | 106.1 | 12 |
| 2004 | 6x139.7 | 106.1 | 12 |
| 2005 | 6x139.7 | 106.1 | 12 |
| ▸ 2006 | 6x139.7 | 106.1 | 12 |
| 2007 | 6x139.7 | 106.1 | 12 |
| 2008 | 6x139.7 | 106.1 | 12 |
| 2009 | 5x150 | 110.0 | 60 |
| 2010 | 5x150 | 110.0 | 60 |
| 2011 | 5x150 | 110.0 | 60 |
| 2012 | 5x150 | 110.0 | 60 |
| 2013 | 5x150 | 110.0 | 60 |
| 2014 | 5x150 | 110.0 | 60 |
| 2015 | 5x150 | 110.0 | 60 |
| 2016 | 5x150 | 110.0 | 60 |
| 2017 | 5x150 | 110.0 | 60 |
| 2018 | 5x150 | 110.1 | 60 |
| 2019 | 5x150 | 110.1 | 60 |
| 2020 | 5x150 | 110.1 | 60 |
| 2021 | 5x150 | 110.1 | 60 |
| 2022 | 5x150 | 110.1 | 60 |
| 2023 | 6x139.7 | 95.1 | 25 |
| 2024 | 6x139.7 | 95.1 | 25 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2006 Toyota Sequoia
The 2006 Toyota Sequoia uses a 6x139.7 bolt pattern with a 106.1mm center bore and 12mm offset. When selecting aftermarket wheels, hub-centric rings are mandatory to match the 106.1mm bore, preventing vibration and ensuring proper load distribution. Offset is sensitive; staying within ±5mm of the factory 12mm offset is recommended to avoid rubbing or suspension interference. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (conical/60-degree) to prevent loosening or damage. Verify wheel load rating exceeds the Sequoia's GVWR. Cross-compatible with 2001–2024 Sequoia wheels.
Historical Fitment Data Reference
In our dataset, Toyota Sequoia appears from 2001 to 2024 (24 model years). Across model years, this model appears with 2 bolt patterns (5x150, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 4
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 48.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid using wheels with a smaller center bore than 106.1mm; they will not fit without machining.
- ✅ Check for caliper clearance when using wheels with offset below 7mm or above 17mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2006 Toyota Sequoia — Frequently Asked Questions
What is the bolt pattern for a 2006 Toyota Sequoia?
The 2006 Toyota Sequoia uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 106.1mm and the offset is 12mm.
What other years of Toyota Sequoia have the same bolt pattern as the 2006?
The Toyota Sequoia uses the 6x139.7 pattern from 2001 through 2024. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
What lug nut size does the 2006 Toyota Sequoia use?
The 2006 Toyota Sequoia uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I put aftermarket wheels on my 2006 Toyota Sequoia?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 12mm, and a center bore of at least 106.1mm (using hub rings if larger).
How do I measure the bolt pattern on my 2006 Toyota?
The 2006 Sequoia uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I use spacers on my 2006 Toyota Sequoia?
Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 106.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset