2025 Toyota Sequoia Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Toyota Sequoia is 6x139.7 (6x5.5"). It has a center bore of 95.1 mm, an offset range of 60, and utilizes 14x1.5 (Flat seat, 21mm hex) fasteners tightened to 97 ft-lbs (131 Nm).
2025 Toyota Sequoia Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Center Bore (Hub Bore) | 95.1 mm |
| Offset Range (ET) | 60 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 97 ft-lbs (131 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2025 Sequoia — Year-Specific Fitment Context
The 2025 Toyota Sequoia is in year 25 of 26 using the 6x139.7 pattern (2001–2026). Wheels from any 2001–2026 Toyota Sequoia are cross-compatible with the 2025 model. Across its full production run (2001–2026), the Sequoia has also used: 5x150.
Toyota Sequoia Bolt Pattern by Year
Looking for all generations? View the complete Toyota Sequoia (2001–2026) Bolt Pattern & Generation Guide →
The table below shows how the Sequoia's wheel specifications have changed over the years. The 2025 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 6x139.7 | 106.1 | 12 |
| 2002 | 6x139.7 | 106.1 | 12 |
| 2003 | 6x139.7 | 106.1 | 12 |
| 2004 | 6x139.7 | 106.1 | 12 |
| 2005 | 6x139.7 | 106.1 | 12 |
| 2006 | 6x139.7 | 106.1 | 12 |
| 2007 | 6x139.7 | 106.1 | 12 |
| 2008 | 6x139.7 | 106.1 | 12 |
| 2009 | 5x150 | 110.0 | 60 |
| 2010 | 5x150 | 110.0 | 60 |
| 2011 | 5x150 | 110.0 | 60 |
| 2012 | 5x150 | 110.0 | 60 |
| 2013 | 5x150 | 110.0 | 60 |
| 2014 | 5x150 | 110.0 | 60 |
| 2015 | 5x150 | 110.0 | 60 |
| 2016 | 5x150 | 110.0 | 60 |
| 2017 | 5x150 | 110.0 | 60 |
| 2018 | 5x150 | 110.1 | 60 |
| 2019 | 5x150 | 110.1 | 60 |
| 2020 | 5x150 | 110.1 | 60 |
| 2021 | 5x150 | 110.1 | 60 |
| 2022 | 5x150 | 110.1 | 60 |
| 2023 | 6x139.7 | 95.1 | 25 |
| 2024 | 6x139.7 | 95.1 | 25 |
| ▸ 2025 | 6x139.7 | 95.1 | 60 |
| 2026 | 6x139.7 | 95.1 | 60 |
2025 Toyota Sequoia Wheel Interchange & Donor Fitment Guide (6x139.7)
The 6x139.7 bolt pattern is shared by 1102 vehicles in our database (common). For safe wheel swaps on the 2025 Toyota Sequoia, donor rims must match the 6x139.7 PCD and have a center bore of at least 95.1 mm:
DIRECT HUB MATCH Same 6x139.7 Pattern & Exact 95.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Lexus GX | 95.1 mm (Exact) | 45-60 | 14x1.5 (Flat) |
| 2022 Lexus LX | 95.1 mm (Exact) | 60 | 14x1.5 (Flat/Mag) |
| 2025 Toyota Tacoma | 95.1 mm (Exact) | 25-35 | 14x1.5 (Flat) |
| 2025 Toyota Tundra | 95.1 mm (Exact) | 60 | 14x1.5 (Flat) |
| 2022 Toyota Tundra CrewMax | 95.1 mm (Exact) | 60 | 14x1.5 (Flat/Mag) |
| 2022 Toyota Tundra Double Cab | 95.1 mm (Exact) | 60 | 14x1.5 (Flat/Mag) |
HUB RING FITMENT Same 6x139.7 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2006 Nissan Armada | 110.1 mm | 110.1mm → 95.1mm |
24 |
| 1994 Nissan Pathfinder | 110.0 mm | 110.0mm → 95.1mm |
40 |
| 2007 Nissan Titan Crew Cab | 110.1 mm | 110.1mm → 95.1mm |
25 |
| 2020 Toyota 4Runner | 106.2 mm | 106.2mm → 95.1mm |
25-30 |
| 2005 Toyota Land Cruiser | 106.1 mm | 106.1mm → 95.1mm |
18 |
| 2023 Toyota Tacoma Access Cab | 106.1 mm | 106.1mm → 95.1mm |
25-30 |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 97 ft-lbs (131 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Toyota Sequoia — Frequently Asked Questions
What is the bolt pattern for a 2025 Toyota Sequoia?
The 2025 Toyota Sequoia uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 95.1mm and the offset is 60mm.
What other years of Toyota Sequoia have the same bolt pattern as the 2025?
The Toyota Sequoia uses the 6x139.7 pattern from 2001 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
Why is matching the 95.1mm center bore important for the 2025 Sequoia?
The 95.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 2025 Toyota Sequoia?
The OEM offset for the 2025 Sequoia is typically around 60mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 60mm offset mean for the 2025 Sequoia?
An offset of 60mm means the wheel's mounting surface is 60mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
Can I put aftermarket wheels on my 2025 Toyota Sequoia?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 60mm, and a center bore of at least 95.1mm (using hub rings if larger).
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →