2025 Toyota Tundra Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Toyota Tundra is 6x139.7 (6x5.5"). It has a center bore of 95.1 mm, an offset range of 60, and utilizes 14x1.5 (Flat seat, 22mm hex) fasteners tightened to 97 ft-lbs (131 Nm).
2025 Toyota Tundra Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Center Bore (Hub Bore) | 95.1 mm |
| Offset Range (ET) | 60 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 22mm |
| Wheel Torque Specs | 97 ft-lbs (131 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2025 Tundra — Year-Specific Fitment Context
The 2025 Toyota Tundra is in year 2 of 3 using the 6x139.7 pattern (2024–2026). Wheels from any 2024–2026 Toyota Tundra are cross-compatible with the 2025 model.
Toyota Tundra Bolt Pattern by Year
Looking for all generations? View the complete Toyota Tundra (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the Tundra's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Toyota Tundra Wheel Interchange & Donor Fitment Guide (6x139.7)
The 6x139.7 bolt pattern is shared by 1102 vehicles in our database (common). For safe wheel swaps on the 2025 Toyota Tundra, donor rims must match the 6x139.7 PCD and have a center bore of at least 95.1 mm:
DIRECT HUB MATCH Same 6x139.7 Pattern & Exact 95.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2023 Toyota Sequoia | 95.1 mm (Exact) | 25 | 14x1.5 (Flat/Mag) |
| 2025 Toyota Tacoma | 95.1 mm (Exact) | 25-35 | 14x1.5 (Flat) |
| 2022 Toyota Tundra CrewMax | 95.1 mm (Exact) | 60 | 14x1.5 (Flat/Mag) |
| 2022 Toyota Tundra Double Cab | 95.1 mm (Exact) | 60 | 14x1.5 (Flat/Mag) |
| 2024 Toyota Tundra Hybrid CrewMax | 95.1 mm (Exact) | 60 | 14x1.5 (Flat/Mag) |
| 2024 Lexus GX | 95.1 mm (Exact) | 25 | 14x1.5 (Flat/Mag) |
HUB RING FITMENT Same 6x139.7 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2020 Toyota 4Runner | 106.2 mm | 106.2mm → 95.1mm |
25-30 |
| 2005 Toyota Land Cruiser | 106.1 mm | 106.1mm → 95.1mm |
18 |
| 2023 Toyota Tacoma Access Cab | 106.1 mm | 106.1mm → 95.1mm |
25-30 |
| 2005 Toyota Tacoma Double Cab | 106.1 mm | 106.1mm → 95.1mm |
25-30 |
| 2005 Toyota Tacoma Regular Cab | 106.1 mm | 106.1mm → 95.1mm |
25-30 |
| 2024 Toyota Tacoma XtraCab | 106.1 mm | 106.1mm → 95.1mm |
25-30 |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 97 ft-lbs (131 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Toyota Tundra — Frequently Asked Questions
What is the bolt pattern for a 2025 Toyota Tundra?
The 2025 Toyota Tundra uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 95.1mm and the offset is 60mm.
What other years of Toyota Tundra have the same bolt pattern as the 2025?
The Toyota Tundra uses the 6x139.7 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
Can I use spacers on my 2025 Toyota Tundra?
Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 95.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
What lug nut size does the 2025 Toyota Tundra use?
The 2025 Toyota Tundra uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Will wheels from another Toyota fit my 2025 Tundra?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 95.1mm.
How do I measure the bolt pattern on my 2025 Toyota?
The 2025 Tundra uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →