2026 Toyota Tundra Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Toyota Tundra is 6x139.7 (6x5.5"). It has a center bore of 95.1 mm, an offset range of 60, and utilizes 14x1.5 (Flat seat, 22mm hex) fasteners tightened to 97 ft-lbs (131 Nm).
2026 Toyota Tundra Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Center Bore (Hub Bore) | 95.1 mm |
| Offset Range (ET) | 60 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 22mm |
| Wheel Torque Specs | 97 ft-lbs (131 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2026 Tundra — Year-Specific Fitment Context
The 2026 model year is the final year of the Toyota Tundra's 6x139.7 bolt pattern run (since 2024). Wheels from any 2024–2026 Toyota Tundra are cross-compatible with the 2026 model.
Toyota Tundra Bolt Pattern by Year
Looking for all generations? View the complete Toyota Tundra (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the Tundra's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Toyota Tundra Wheel Interchange & Donor Fitment Guide (6x139.7)
The 6x139.7 bolt pattern is shared by 1102 vehicles in our database (common). For safe wheel swaps on the 2026 Toyota Tundra, donor rims must match the 6x139.7 PCD and have a center bore of at least 95.1 mm:
DIRECT HUB MATCH Same 6x139.7 Pattern & Exact 95.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2023 Toyota Sequoia | 95.1 mm (Exact) | 25 | 14x1.5 (Flat/Mag) |
| 2025 Toyota Tacoma | 95.1 mm (Exact) | 25-35 | 14x1.5 (Flat) |
| 2022 Toyota Tundra CrewMax | 95.1 mm (Exact) | 60 | 14x1.5 (Flat/Mag) |
| 2022 Toyota Tundra Double Cab | 95.1 mm (Exact) | 60 | 14x1.5 (Flat/Mag) |
| 2024 Toyota Tundra Hybrid CrewMax | 95.1 mm (Exact) | 60 | 14x1.5 (Flat/Mag) |
| 2024 Lexus GX | 95.1 mm (Exact) | 25 | 14x1.5 (Flat/Mag) |
HUB RING FITMENT Same 6x139.7 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2005 Toyota Land Cruiser | 106.1 mm | 106.1mm → 95.1mm |
18 |
| 2023 Toyota Tacoma Access Cab | 106.1 mm | 106.1mm → 95.1mm |
25-30 |
| 2005 Toyota Tacoma Double Cab | 106.1 mm | 106.1mm → 95.1mm |
25-30 |
| 2005 Toyota Tacoma Regular Cab | 106.1 mm | 106.1mm → 95.1mm |
25-30 |
| 2024 Toyota Tacoma XtraCab | 106.1 mm | 106.1mm → 95.1mm |
25-30 |
| 2025 Isuzu NPR | 110 mm | 110mm → 95.1mm |
Not Applicable |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 97 ft-lbs (131 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Toyota Tundra — Frequently Asked Questions
What is the bolt pattern for a 2026 Toyota Tundra?
The 2026 Toyota Tundra uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 95.1mm and the offset is 60mm.
What other years of Toyota Tundra have the same bolt pattern as the 2026?
The Toyota Tundra uses the 6x139.7 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Can I use spacers on my 2026 Toyota Tundra?
Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 95.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Do 2026 Toyota Tundras use lug bolts or lug nuts?
The 2026 Tundra requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Why is matching the 95.1mm center bore important for the 2026 Tundra?
The 95.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the center bore of a 2026 Toyota Tundra?
The factory center bore (hub bore) for the 2026 Toyota Tundra is 95.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →