2003 Toyota Tundra Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2003 Toyota Tundra Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 106.1 mm |
| Offset (ET) | 15 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2003 Tundra Regular Cab — Year-Specific Fitment Context
The 2003 Toyota Tundra Regular Cab is in year 4 of 7 using the 6x139.7 pattern (2000–2006). Wheels from any 2000–2006 Toyota Tundra Regular Cab are cross-compatible with the 2003 model. Across its full production run (2000–2017), the Tundra Regular Cab has also used: 5x150.
Toyota Tundra Regular Cab Bolt Pattern by Year
The table below shows how the Tundra Regular Cab's wheel specifications have changed over the years. The 2003 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 6x139.7 | 106.1 | 15 |
| 2001 | 6x139.7 | 106.1 | 15 |
| 2002 | 6x139.7 | 106.1 | 15 |
| ▸ 2003 | 6x139.7 | 106.1 | 15 |
| 2004 | 6x139.7 | 106.1 | 15 |
| 2005 | 6x139.7 | 106.1 | 15 |
| 2006 | 6x139.7 | 106.1 | 15 |
| 2007 | 5x150 | 110.1 | 60 |
| 2008 | 5x150 | 110.1 | 60 |
| 2009 | 5x150 | 110.1 | 60 |
| 2010 | 5x150 | 110.1 | 60 |
| 2011 | 5x150 | 110.1 | 60 |
| 2012 | 5x150 | 110.1 | 60 |
| 2013 | 5x150 | 110.1 | 60 |
| 2014 | 5x150 | 110.1 | 60 |
| 2015 | 5x150 | 110.1 | 60 |
| 2016 | 5x150 | 110.1 | 60 |
| 2017 | 5x150 | 110.1 | 60 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2003 Toyota Tundra Regular Cab
For your 2003 Toyota Tundra Regular Cab, the 6x139.7 bolt pattern and 106.1mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 108mm), requiring hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 15mm; staying within ±5mm avoids rubbing or clearance issues. Always use lug nuts with the correct 12x1.5 thread pitch and a 60-degree conical seat—mismatched seats can cause wheel loosening. Verify that aftermarket wheels are hub-centric or use rings, and check offset carefully to maintain safe suspension geometry.
Historical Fitment Data Reference
In our dataset, Toyota Tundra Regular Cab appears from 2000 to 2017 (18 model years). Across model years, this model appears with 2 bolt patterns (5x150, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 45.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for settling.
- ✅ Avoid wheels with offset beyond 10-20mm to prevent bearing stress or fender contact.
- ✅ Inspect hub-centric ring material (aluminum preferred) and ensure snug fit to the hub.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2003 Toyota Tundra Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2003 Toyota Tundra Regular Cab?
The 2003 Toyota Tundra Regular Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 106.1mm and the offset is 15mm.
What other years of Toyota Tundra Regular Cab have the same bolt pattern as the 2003?
The Toyota Tundra Regular Cab uses the 6x139.7 pattern from 2000 through 2006. Wheels from any of these model years are dimensionally compatible with the 2003, provided the offset and center bore also match.
Why is matching the 106.1mm center bore important for the 2003 Tundra Regular Cab?
The 106.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I use spacers on my 2003 Toyota Tundra Regular Cab?
Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 106.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Do 2003 Toyota Tundra Regular Cabs use lug bolts or lug nuts?
The 2003 Tundra Regular Cab requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What does 15mm offset mean for the 2003 Tundra Regular Cab?
An offset of 15mm means the wheel's mounting surface is 15mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset