2015 Toyota Tundra Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2015 Toyota Tundra Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x150 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 110.1 mm |
| Offset (ET) | 60 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2015 Tundra Regular Cab — Year-Specific Fitment Context
The 2015 Toyota Tundra Regular Cab is in year 9 of 11 using the 5x150 pattern (2007–2017). Wheels from any 2007–2017 Toyota Tundra Regular Cab are cross-compatible with the 2015 model. Across its full production run (2000–2017), the Tundra Regular Cab has also used: 6x139.7.
Toyota Tundra Regular Cab Bolt Pattern by Year
The table below shows how the Tundra Regular Cab's wheel specifications have changed over the years. The 2015 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 6x139.7 | 106.1 | 15 |
| 2001 | 6x139.7 | 106.1 | 15 |
| 2002 | 6x139.7 | 106.1 | 15 |
| 2003 | 6x139.7 | 106.1 | 15 |
| 2004 | 6x139.7 | 106.1 | 15 |
| 2005 | 6x139.7 | 106.1 | 15 |
| 2006 | 6x139.7 | 106.1 | 15 |
| 2007 | 5x150 | 110.1 | 60 |
| 2008 | 5x150 | 110.1 | 60 |
| 2009 | 5x150 | 110.1 | 60 |
| 2010 | 5x150 | 110.1 | 60 |
| 2011 | 5x150 | 110.1 | 60 |
| 2012 | 5x150 | 110.1 | 60 |
| 2013 | 5x150 | 110.1 | 60 |
| 2014 | 5x150 | 110.1 | 60 |
| ▸ 2015 | 5x150 | 110.1 | 60 |
| 2016 | 5x150 | 110.1 | 60 |
| 2017 | 5x150 | 110.1 | 60 |
5x150 Pattern Context
This bolt pattern appears on 93 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x150:
Expert Buying Guide for 2015 Toyota Tundra Regular Cab
For the 2015 Toyota Tundra Regular Cab, the bolt pattern is 5x150 with a center bore of 110.1mm. When selecting aftermarket wheels, hub-centric rings are essential to match this bore precisely, preventing vibrations and ensuring proper load distribution. The factory offset is 60mm; deviations beyond ±10mm may cause rubbing or clearance issues with suspension and body components. Always use lug nuts with the correct thread pitch (14x1.5) and seat type—factory wheels use a conical (60-degree) seat. Avoid ball-seat lug nuts, as they can loosen over time. Verify that aftermarket wheels are hub-centric or use compatible rings to maintain safety and performance.
Historical Fitment Data Reference
In our dataset, Toyota Tundra Regular Cab appears from 2000 to 2017 (18 model years). Across model years, this model appears with 2 bolt patterns (5x150, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 45.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating and prevent loosening.
- ✅ Check for caliper clearance when using wheels with lower offset (e.g., 50mm) to avoid contact with brake components.
- ✅ If installing wheels from a 2007-2017 Tundra, confirm center bore is 110.1mm; some aftermarket wheels may require hub-centric rings.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2015 Toyota Tundra Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2015 Toyota Tundra Regular Cab?
The 2015 Toyota Tundra Regular Cab uses a 5x150 bolt pattern (also called lug pattern or PCD). The center bore is 110.1mm and the offset is 60mm.
What other years of Toyota Tundra Regular Cab have the same bolt pattern as the 2015?
The Toyota Tundra Regular Cab uses the 5x150 pattern from 2007 through 2017. Wheels from any of these model years are dimensionally compatible with the 2015, provided the offset and center bore also match.
Can I use spacers on my 2015 Toyota Tundra Regular Cab?
Yes, but ensure the wheel spacers match the 5x150 bolt pattern and 110.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
What is the PCD for a 2015 Toyota Tundra Regular Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2015 Tundra Regular Cab, the PCD is 5x150.
How do I measure the bolt pattern on my 2015 Toyota?
The 2015 Tundra Regular Cab uses a 5x150 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Will wheels from another Toyota fit my 2015 Tundra Regular Cab?
Only if they share the exact same 5x150 bolt pattern, a compatible offset, and a center bore equal to or larger than 110.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset