2024 Honda SXS1000M (Pioneer 1000) Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Honda SXS1000M (Pioneer 1000), along with offset and center bore data.
2024 Honda SXS1000M (Pioneer 1000) Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 4x137 |
|---|---|
| Lug Nut / Bolt Size | 10x1.25 |
| Center Bore (CB) | Not Applicable mm |
| Offset (ET) | Not Applicable |
| Torque Specs | 76 ft-lbs (103 Nm) |
2024 SXS1000M (Pioneer 1000) — Year-Specific Fitment Context
The 2024 model year marks the beginning of the Honda SXS1000M (Pioneer 1000)'s 4x137 bolt pattern era, which continued through 2025 (2 consecutive years). Wheels from any 2024–2025 Honda SXS1000M (Pioneer 1000) are cross-compatible with the 2024 model.
Honda SXS1000M (Pioneer 1000) Bolt Pattern by Year
The table below shows how the SXS1000M (Pioneer 1000)'s wheel specifications have changed over the years. The 2024 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2024 | 4x137 | Not Applicable | Not Applicable |
| 2025 | 4x137 | Not Applicable | Not Applicable |
4x137 Pattern Context
This bolt pattern appears on 3 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x137:
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 76 ft-lbs (103 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
2024 Honda SXS1000M (Pioneer 1000) — Frequently Asked Questions
What is the bolt pattern for a 2024 Honda SXS1000M (Pioneer 1000)?
The 2024 Honda SXS1000M (Pioneer 1000) uses a 4x137 bolt pattern (also called lug pattern or PCD). The center bore is Not Applicablemm and the offset is Not Applicablemm.
What other years of Honda SXS1000M (Pioneer 1000) have the same bolt pattern as the 2024?
The Honda SXS1000M (Pioneer 1000) uses the 4x137 pattern from 2024 through 2025. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
What is the factory wheel offset for a 2024 Honda SXS1000M (Pioneer 1000)?
The OEM offset for the 2024 SXS1000M (Pioneer 1000) is typically around Not Applicablemm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Will wheels from another Honda fit my 2024 SXS1000M (Pioneer 1000)?
Only if they share the exact same 4x137 bolt pattern, a compatible offset, and a center bore equal to or larger than Not Applicablemm.
What lug nut size does the 2024 Honda SXS1000M (Pioneer 1000) use?
The 2024 Honda SXS1000M (Pioneer 1000) uses 10x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the PCD for a 2024 Honda SXS1000M (Pioneer 1000)?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2024 SXS1000M (Pioneer 1000), the PCD is 4x137.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset