2009 HUMMER H3T Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2009 HUMMER H3T, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 6x139.7 (6x5.5")
Lug Nut / Bolt Size N 12x1.50
Center Bore (CB) 100 mm
Offset (ET) 20
Torque Specs 80 ft-lbs (108 Nm)

2009 H3T — Year-Specific Fitment Context

The 2009 model year marks the beginning of the HUMMER H3T's 6x139.7 bolt pattern era, which continued through 2010 (2 consecutive years). Wheels from any 2009–2010 HUMMER H3T are cross-compatible with the 2009 model.

HUMMER H3T Bolt Pattern by Year

The table below shows how the H3T's wheel specifications have changed over the years. The 2009 model year is highlighted.

Year Bolt Pattern Center Bore Offset
▸ 2009 6x139.7 100 20
2010 6x139.7 100 20

Fitment Notes

The 2009 HUMMER H3T has a bolt pattern of 6x139.7.

Imperial Conversion: This bolt pattern is commonly referred to as 6x5.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 6x5.5".

This means it is a 6 lug pattern with a circle diameter of 139.7mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, HUMMER H3T appears from 2009 to 2010 (2 model years).

Across recorded model years, this model generally keeps the same bolt pattern.

6x139.7 Pattern Context

This bolt pattern appears on 1067 vehicles in our current database and is considered common.

Examples of other vehicles using 6x139.7:

2009 HUMMER H3T — Frequently Asked Questions

What is the bolt pattern for a 2009 HUMMER H3T?

The 2009 HUMMER H3T uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 100mm and the offset is 20mm.

What other years of HUMMER H3T have the same bolt pattern as the 2009?

The HUMMER H3T uses the 6x139.7 pattern from 2009 through 2010. Wheels from any of these model years are dimensionally compatible with the 2009, provided the offset and center bore also match.

Will wheels from another HUMMER fit my 2009 H3T?

Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 100mm.

Why is matching the 100mm center bore important for the 2009 H3T?

The 100mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.

How tight should I torque the lug nuts on a 2009 HUMMER H3T?

Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

What is the center bore of a 2009 HUMMER H3T?

The factory center bore (hub bore) for the 2009 HUMMER H3T is 100mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

HUMMER H3T is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2009 HUMMER H3T, please report it via our About page contact so we can verify and update this record.

HUMMER H3T By Year

2009 2010

Other HUMMER Models

H1 H2 H3 H3T