2008 Isuzu i-370 Crew Cab Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Isuzu i-370 Crew Cab, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 6x139.7 (6x5.5")
Lug Nut / Bolt Size 12x1.5
Center Bore (CB) 100.1 mm
Offset (ET) 38
Torque Specs 80 ft-lbs (108 Nm)

2008 i-370 Crew Cab — Year-Specific Fitment Context

The 2008 model year is the final year of the Isuzu i-370 Crew Cab's 6x139.7 bolt pattern run (since 2007). Wheels from any 2007–2008 Isuzu i-370 Crew Cab are cross-compatible with the 2008 model.

Isuzu i-370 Crew Cab Bolt Pattern by Year

The table below shows how the i-370 Crew Cab's wheel specifications have changed over the years. The 2008 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2007 6x139.7 100.1 38
▸ 2008 6x139.7 100.1 38

Fitment Notes

The 2008 Isuzu i-370 Crew Cab has a bolt pattern of 6x139.7.

Imperial Conversion: This bolt pattern is commonly referred to as 6x5.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 6x5.5".

This means it is a 6 lug pattern with a circle diameter of 139.7mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Isuzu i-370 Crew Cab appears from 2007 to 2008 (2 model years).

Across recorded model years, this model generally keeps the same bolt pattern.

6x139.7 Pattern Context

This bolt pattern appears on 1067 vehicles in our current database and is considered common.

Examples of other vehicles using 6x139.7:

2008 Isuzu i-370 Crew Cab — Frequently Asked Questions

What is the bolt pattern for a 2008 Isuzu i-370 Crew Cab?

The 2008 Isuzu i-370 Crew Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 100.1mm and the offset is 38mm.

What other years of Isuzu i-370 Crew Cab have the same bolt pattern as the 2008?

The Isuzu i-370 Crew Cab uses the 6x139.7 pattern from 2007 through 2008. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.

Do 2008 Isuzu i-370 Crew Cabs use lug bolts or lug nuts?

The 2008 i-370 Crew Cab requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.

Will wheels from another Isuzu fit my 2008 i-370 Crew Cab?

Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 100.1mm.

How do I measure the bolt pattern on my 2008 Isuzu?

The 2008 i-370 Crew Cab uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.

What is the PCD for a 2008 Isuzu i-370 Crew Cab?

PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2008 i-370 Crew Cab, the PCD is 6x139.7.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Isuzu i-370 Crew Cab is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2008 Isuzu i-370 Crew Cab, please report it via our About page contact so we can verify and update this record.

Isuzu i-370 Crew Cab By Year

2007 2008

Other Isuzu Models

Amigo Ascender Axiom Hombre Regular Cab Hombre Spacecab Impulse Oasis Regular Cab Rodeo Rodeo Sport Spacecab Stylus Trooper VehiCROSS i-280 Extended Cab i-290 Extended Cab i-350 Crew Cab i-370 Crew Cab i-370 Extended Cab